Airtac SAUJ100 Adjustable Cylinder SAUJ100X850-50
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X850-50 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 850mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke850 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUJ100 Adjustable Cylinder SAUJ100X850-50
The AirTAC SAUJ100X850-50 is a double-acting, double-rod profile cylinder with an external stop screw that lets you shorten the extend stroke on-site by up to 50 mm. The nominal 850 mm stroke is the maximum, yielding a usable range of 800-850 mm. It features a hard-anodized extruded aluminum barrel, making it shorter than an ISO 15552 cylinder of the same 100 mm bore. The 1/2" port and M20x1.5 rod thread handle serious pneumatic flow.
It includes 29 mm adjustable air cushions at each end. Note this SKU lacks a magnet, so it cannot accept CMSG or DMSG sensors.
Airtac SAUJ100 Adjustable Cylinder SAUJ100X850-50 Technical Specifications
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X850-50 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUJ100 Adjustable Cylinder SAUJ100X850-50
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUJ100 Adjustable Cylinder SAUJ100X850-50 Is Used
Long-Reach Press Damping
Needs precise extend end-position tuning to accommodate varying material thicknesses without reordering the actuator.
Pallet Transfer Stopper
Requires field adjustment of the stop length to handle different pallet footprints on the same line.
Heavy Load Diversion
Demands a robust 200 kg vertical lift capacity with an adjustable stroke window for multi-size package routing.
Is the Airtac SAUJ100 Adjustable Cylinder SAUJ100X850-50 the Right Cylinder?
Choose the SAUJ over a fixed SAU when your machine assembly requires field-tuning of the end position; the 50 mm window saves you from buying a new cylinder if the stroke needs slight reduction. Mounting options include Basic, FA flange, and LB foot, sharing compatibility only with the AirTAC SC series. Because the 850 mm stroke is long, always use external guides to prevent rod bending and manage side loads. Finally, this non-magnetic SKU cannot support position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUJ100 Adjustable Cylinder SAUJ100X850-50 FAQ
The theoretical max is 801 kgf at 1.0 MPa. The external stop screw allows you to shorten the extend stroke by up to 50 mm, giving a usable range of 800-850 mm from the 850 mm maximum.
No to both. The stop screw sets the end position but is not a load lock; without live air the piston drifts and the 29 mm cushion only decelerates. For holding a load use an external rod lock or pilot-operated check valve. Additionally, this SKU lacks a magnet, so it cannot accept CMSG or DMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUJ100 Adjustable Cylinder SAUJ100X850-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.