The AirTAC Airtac SC40 Standard Cylinder SC40X107 is a genuine double-acting standard air cylinder with a Ø40mm bore and 107mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC40X107 is a double-acting tie-rod cylinder with a 40 mm bore and a 107 mm non-standard stroke, delivering a push force of 628 N at 0.5 MPa. Its 16 mm diameter piston rod and PT1/4 port connections suit compact pneumatic circuits requiring medium force in a custom stroke length.
With a body length of 142 mm and a 21 mm adjustable air cushion, this cylinder decelerates the piston smoothly at end-of-stroke. The operating pressure spans 0.15–1.0 MPa, and the standard TPU seals provide a temperature range of -20 to +70 °C.
| Model | Airtac SC40 Standard Cylinder SC40X107 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 107 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×107 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 107 mm stroke and 628 N push force at 0.5 MPa reliably actuates diverter gates on packaging conveyors, sorting cartons by weight or barcode.
Applies consistent clamping force for medium-duty CNC fixtures. The adjustable cushion reduces impact vibration, protecting workpiece alignment.
Operates a sliding gate on a small material hopper. The tie-rod construction withstands dusty environments when paired with a rod boot.
Choose the SC40 bore when 628 N push at 0.5 MPa fits the load; if you need more force, step up to the SC50 which provides 982 N at the same pressure. For lighter, faster applications, the SC32 delivers 402 N. This 107 mm stroke is non-standard—verify lead time if a standard 100 mm or 125 mm stroke cannot be substituted.
For strokes above 100 mm, avoid side loads on the 16 mm rod. Use an external linear guide or a guided cylinder to prevent rod bending and premature bearing wear. When replacing an existing cylinder, match bore, stroke, PT1/4 port thread, basic mounting, and confirm the magnet option is not required.
Quick checklist
At 0.7 MPa operating pressure, the SC40 bore generates 879 N of push force. The theoretical maximum force at 1.0 MPa is 128 kgf.
No. The SC series is a tie-rod cylinder and is shorter than an ISO 15552 profile cylinder, so mounting dimensions and body length are not interchangeable. Only replace another AirTAC SC tie-rod cylinder with the same 40 mm bore, matching stroke, and PT1/4 ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.