The AirTAC Airtac SC40 Standard Cylinder SC40X110 is a genuine double-acting standard air cylinder with a Ø40mm bore and 110mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC40X110 is a 40 mm bore, 110 mm stroke double-acting pneumatic cylinder delivering 628 N of push force at 0.5 MPa. Its 16 mm diameter piston rod and 21 mm adjustable air cushion provide reliable deceleration for mid-range linear motion tasks.
With a body length of 142 mm, the SC40X110 fits installations where a shorter overall envelope than an ISO 15552 cylinder is needed. The PT1/4 port and M12x1.25 rod thread connect directly to standard pneumatic fittings, and the TPU seals support operation from -20 to +70 °C.
| Model | Airtac SC40 Standard Cylinder SC40X110 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 628 N push force stops cartons or tote bins on a gravity conveyor. The adjustable cushion absorbs impact energy cleanly, reducing noise and product damage at the gate.
With a 16 mm rod and 879 N at 0.7 MPa, the SC40X110 applies steady clamping pressure in woodworking jigs or light assembly presses without over-deflecting the rod.
The 110 mm stroke provides enough travel to pivot a small diverter arm. The tie-rod construction allows easy maintenance in dusty logistics environments.
Choose the SC40X110 when your application needs around 628 N of thrust; for higher force, step up to the SC50 bore (982 N at 0.5 MPa), or down to the SC32 (402 N) for a lighter, more compact actuator. The 110 mm stroke is a standard length within the 40 bore’s 1200 mm maximum.
For replacement, match five points: 40 mm bore, 110 mm stroke, PT1/4 port thread, basic (no mounting accessory), and no magnet. This is a tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to another AirTAC SC or equivalent tie-rod design.
Quick checklist
At 0.7 MPa (7 bar) supply pressure, the SC40X110 generates 879 N of push force. The pull force on the retract stroke is 528 N at 0.5 MPa, due to the 16 mm rod reducing the piston area on the rod side.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder. The mounting dimensions and overall envelope differ, so a direct drop-in replacement is not guaranteed. Match with another AirTAC SC tie-rod cylinder of the same bore and stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.