Airtac SC40 Standard Cylinder SC40X290S
The AirTAC Airtac SC40 Standard Cylinder SC40X290S is a genuine double-acting standard air cylinder with a Ø40mm bore and 290mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke290 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
About the Airtac SC40 Standard Cylinder SC40X290S
The SC40X290S is a double-acting pneumatic cylinder with a 40 mm bore and 290 mm stroke, delivering 628 N of push force at 0.5 MPa (1130 N at the maximum operating pressure of 0.9 MPa). Its 16 mm diameter piston rod and 21 mm adjustable air cushion provide reliable deceleration for mid-range linear tasks.
This model includes the factory-installed -S magnet, allowing CMSG, DMSG, or EMSG sensors to clamp directly onto the tie-rod barrel for non-contact position sensing. The standard PT1/4 port thread and TPU seals suit filtered-air environments from -20 to +70 °C.
Airtac SC40 Standard Cylinder SC40X290S Technical Specifications
| Model | Airtac SC40 Standard Cylinder SC40X290S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC40 Standard Cylinder SC40X290S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC40 Standard Cylinder SC40X290S Is Used
Packaging Gate Actuation
The 290 mm stroke and sensor-ready magnet make this cylinder ideal for diverting cartons on packaging conveyors, where end-of-stroke confirmation is required for cycle sequencing.
Automated Assembly Clamping
Delivers 628 N of consistent clamping force for jigs and fixtures in automated assembly cells, with the built-in magnet enabling sensor feedback to the PLC.
Material Lift & Transfer
Suitable for pushing or lifting components between conveyor levels in material handling systems, where the adjustable cushion protects the load from end-of-stroke shock.
Is the Airtac SC40 Standard Cylinder SC40X290S the Right Cylinder?
For applications needing more force, stepping up to the 50 mm bore SC50 series provides 982 N of push at 0.5 MPa. If a shorter, more compact unit is acceptable, the 32 mm bore SC32 series offers 402 N at the same pressure. Always match the replacement cylinder across five points: bore, stroke, port thread (PT), mounting accessory, and the presence of the magnet (-S).
At a 290 mm stroke, the 16 mm rod is well-supported for axial loads, but any side loading requires an external guide or a guided cylinder to prevent rod bearing wear and bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC40 Standard Cylinder SC40X290S FAQ
At the standard 0.5 MPa operating pressure, the push force is 628 N and the pull force is 528 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 1130 N. The theoretical maximum force at 1.0 MPa is 128 kgf.
Yes. The -S suffix indicates a built-in magnet, which is specifically designed for use with AirTAC CMSG (reed) and DMSG/EMSG (solid-state) sensors. These sensors clamp directly onto the cylinder's tie-rod barrel for reliable, non-contact position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC40 Standard Cylinder SC40X290S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.