The AirTAC Airtac SC40 Standard Cylinder SC40X30H is a genuine double-acting standard air cylinder with a Ø40mm bore and 30mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC40X30H is a compact-stroke double-acting cylinder built for high-temperature environments, with Viton (FKM) seals extending the operating range to 0–150 °C. At 0.5 MPa it provides 628 N push and 528 N pull, driven by a 16 mm diameter piston rod with M12x1.25 male threads.
With a 30 mm stroke and a body length A of just 142 mm, this model fits tight automation spaces where heat resistance is critical. The adjustable air cushion (21 mm length) decelerates the end-of-stroke mass smoothly, and the PT1/4 ports connect to standard pneumatic plumbing.
| Model | Airtac SC40 Standard Cylinder SC40X30H |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Viton seals allow direct mounting near ovens, autoclaves, or heated platens where ambient temperatures reach 150 °C, eliminating the need for thermal standoffs.
The 30 mm short stroke and 628 N push force suit clamping specimens in environmental test chambers that cycle between cold and hot extremes.
Withstands the radiant heat from mould tools, providing reliable short-stroke ejection or gate-cutting force without seal degradation.
Choose the SC40X30H when ambient or media temperatures exceed the standard 70 °C limit—the Viton seals maintain full performance up to 150 °C. If your force requirement is lower, the SC32 bore offers 402 N push at 0.5 MPa; for more force, step up to the SC50 at 982 N push.
For replacement, match five points: bore (40 mm), stroke (30 mm), PT port thread, basic mounting, and the -H high-temperature seal variant. This is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
At 0.7 MPa supply pressure the cylinder produces 879 N extending (push) and 528 N retracting (pull). The maximum operating force at 0.9 MPa is 1130 N push.
No. The SC40X30H model code does not include the -S magnet suffix, so the piston does not carry a magnetic ring. To use CMSG/DMSG sensors, order the SC40X30SH variant instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.