The AirTAC Airtac SC40 Standard Cylinder SC40X35H is a genuine double-acting standard air cylinder with a Ø40mm bore and 35mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC40X35H is a compact double-acting tie-rod cylinder delivering 628 N of push force at 0.5 MPa (1130 N at 0.9 MPa). With a 35 mm stroke and a 16 mm diameter piston rod, it suits short-throw clamping, ejecting, and sorting tasks where space is tight.
This variant uses high-temperature Viton (FKM) seals, extending the operating range to 0–150 °C — ideal for autoclaves, drying tunnels, or foundry equipment. The body length A is 142 mm, giving a total extended length of approximately 177 mm. Ports are PT1/4 with an M12x1.25 rod thread, and the adjustable air cushion (21 mm) softens end-of-stroke impact.
| Model | Airtac SC40 Standard Cylinder SC40X35H |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Viton seals allow this 40 mm cylinder to operate gates and diverters inside ovens, dryers, or steam tunnels where ambient temperatures reach 150 °C, providing reliable 628 N push force.
Delivers a short, controlled 35 mm stroke for thermal bonding or laminating fixtures. The 16 mm rod and PT1/4 port supply consistent force even as the tooling heats up.
Actuates a dispensing head or needle valve in hot-melt adhesive systems. The 0–150 °C seal rating prevents premature seal failure from conducted heat, maintaining a clean production line.
For applications needing more force, the 50 mm bore SC50 delivers 982 N at 0.5 MPa; for a lighter, more compact actuator, the 32 mm bore SC32 provides 402 N. Always match replacement cylinders on all five key points: bore (40 mm), stroke (35 mm), PT port thread, basic (no accessory) mounting, and the absence of a magnet.
Although the 35 mm stroke is short, ensure the load is guided if any side force is present — even a short rod can bind if the load is not constrained to move axially.
Quick checklist
At 0.7 MPa supply pressure, this 40 mm bore cylinder produces 879 N of push force and 528 N of pull force. The theoretical maximum at 1.0 MPa is 128 kgf.
No. The SC series is a tie-rod cylinder with a shorter body length (A=142 mm) than an ISO 15552 profile cylinder. It is not dimensionally interchangeable. Only replace another AirTAC SC40 tie-rod cylinder with matching bore, stroke, port, and mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.