verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC40 Standard Cylinder SC40X600S

The AirTAC SC40 Standard Cylinder SC40X600S is a genuine double-acting standard air cylinder with a Ø40mm bore and 600mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ40 mm
  • Stroke600 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 21 mm
$69.54 $77.04Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SC40 stroke, mounting and version on one page All SC40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SC40 Standard Cylinder SC40X600S

The AirTAC SC40X600S is a double-acting tie-rod cylinder delivering 628 N of push force at 0.5 MPa, ideal for medium-stroke transfer and clamping tasks. Its 16 mm diameter piston rod and 21 mm adjustable air cushion provide smooth deceleration, while the built-in magnet allows direct mounting of CMSG/DMSG/EMSG sensors for reliable end-of-stroke detection.

With a 600 mm stroke and a compact body length A of 142 mm, this cylinder offers an extended reach without the bulk of an ISO 15552 profile. The PT1/4 ports and M12x1.25 rod thread ensure straightforward pneumatic connections, and the TPU seals support operation from -20 to +70 °C.

Airtac SC40 Standard Cylinder SC40X600S Technical Specifications

ModelAirtac SC40 Standard Cylinder SC40X600S
SeriesSC standard tie-rod cylinder
Bore sizeØ40 mm
Stroke600 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 21 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (approx.)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC40 Standard Cylinder SC40X600S

SCStandard tie-rod cylinder series.
40Bore size in mm.
×600Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC40 Standard Cylinder SC40X600S Is Used

conveyor_belt

Part Transfer

Moves components between conveyor lanes with a 600 mm reach, using the integrated magnet for position feedback to the PLC.

compress

Clamping & Holding

Applies 628 N of clamping force at 0.5 MPa for woodworking or light assembly jigs, with sensor confirmation of clamp engagement.

precision_manufacturing

Automated Sorting

Pushes parts into sorting chutes based on sensor input, leveraging the long 600 mm stroke and magnetic piston for multi-position sensing.

Is the Airtac SC40 Standard Cylinder SC40X600S the Right Cylinder?

For applications needing more force, stepping up to the SC50 series provides 982 N of push at 0.5 MPa. At a 600 mm stroke, ensure the rod is protected from side loads; an external guide or self-guided tooling is recommended to prevent rod bearing wear and bending. When replacing an existing cylinder, match bore, stroke, PT1/4 port thread, the built-in magnet (-S suffix), and basic mount configuration.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC40 Standard Cylinder SC40X600S FAQ

At 0.5 MPa, the cylinder provides 628 N extending (push) and 528 N retracting (pull). At the maximum operating pressure of 0.9 MPa, the extending force reaches 1130 N.

Yes. The -S suffix in SC40X600S denotes a built-in magnet in the piston, allowing AirTAC CMSG, DMSG, or EMSG reed and solid-state sensors to be clamped directly onto the cylinder barrel for contactless position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC40 Standard Cylinder SC40X600S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SC40X600S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.