verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC40 Standard Cylinder SC40X610SH

The AirTAC SC40 Standard Cylinder SC40X610SH is a genuine double-acting standard air cylinder with a Ø40mm bore and 610mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ40 mm
  • Stroke610 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 21 mm
$82.31 $89.81Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SC40 stroke, mounting and version on one page All SC40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SC40 Standard Cylinder SC40X610SH

The SC40X610SH is a double-acting pneumatic cylinder delivering a push force of 628 N at 0.5 MPa and up to 1130 N at 0.9 MPa operating pressure. Its 16 mm diameter piston rod and 21 mm adjustable air cushion provide smooth deceleration across the 610 mm stroke, making it suitable for medium-duty linear tasks that need consistent force and reliable cushioning.

This model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, enabling precise end-of-stroke detection without external brackets. The -H suffix specifies Viton (FKM) seals, shifting the operating temperature range to 0 to +150 °C for hot or chemically aggressive environments. Ports are standard PT1/4.

Airtac SC40 Standard Cylinder SC40X610SH Technical Specifications

ModelAirtac SC40 Standard Cylinder SC40X610SH
SeriesSC standard tie-rod cylinder
Bore sizeØ40 mm
Stroke610 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 21 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (approx.)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC40 Standard Cylinder SC40X610SH

SCStandard tie-rod cylinder series.
40Bore size in mm.
×610Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC40 Standard Cylinder SC40X610SH Is Used

precision_manufacturing

Hot-Zone Material Handling

The Viton seals allow this cylinder to operate reliably in ambient temperatures up to 150°C, making it ideal for actuators near ovens, autoclaves, or heated press tooling.

conveyor_belt

Sensor-Monitored Sorting Gates

The built-in magnetic piston enables CMSG/DMSG sensors to confirm gate position, providing closed-loop feedback for diverting packages or parts on conveyor lines.

biotech

Sterilization Equipment Actuation

Suitable for clean-in-place or steam-washdown environments where FKM seals resist aggressive cleaning agents and high-temperature sterilization cycles.

Is the Airtac SC40 Standard Cylinder SC40X610SH the Right Cylinder?

For applications requiring more force, stepping up to the 50 mm bore SC50 series provides 982 N of push at 0.5 MPa. If space is a constraint but less force is acceptable, the 32 mm bore delivers 402 N. At a 610 mm stroke, the 16 mm rod is susceptible to bending under side loads; use an external linear guide or a rod-alignment coupler to protect the rod bearing and extend seal life.

When replacing an existing cylinder, match five points: 40 mm bore, 610 mm stroke, PT1/4 port thread, the built-in magnet (-S) for sensor compatibility, and the Viton seal material (-H) for high-temperature operation. This tie-rod design is dimensionally shorter than an ISO 15552 cylinder and is not a direct interchange for that standard.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC40 Standard Cylinder SC40X610SH FAQ

At 0.7 MPa operating pressure, the push force is 879 N and the pull force on the return stroke is 528 N. The maximum operating force at 0.9 MPa is 1130 N push.

Yes. The -S suffix indicates a magnet is built into the piston, so AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors can be clamped directly onto the barrel to detect piston position without any modification.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC40 Standard Cylinder SC40X610SH

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SC40X610SH and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.