Airtac SC50 Standard Cylinder SC50X100SCB
The AirTAC Airtac SC50 Standard Cylinder SC50X100SCB is a genuine double-acting standard air cylinder with a Ø50mm bore and 100mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke100 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
About the Airtac SC50 Standard Cylinder SC50X100SCB
The SC50X100SCB is a 50 mm bore, 100 mm stroke double-acting pneumatic cylinder delivering 982 N of push force at 0.5 MPa (1767 N at 0.9 MPa). Its 20 mm diameter piston rod and 21 mm adjustable air cushion provide reliable deceleration for mid-range linear tasks.
This configuration ships with a built-in magnet for barrel-mounted CMSG/DMSG/EMSG sensors and a rear double clevis (CB) mount for pivoting applications. The tie-rod construction keeps the overall length compact at 250 mm (body length A 150 mm + 100 mm stroke).
Airtac SC50 Standard Cylinder SC50X100SCB Technical Specifications
| Model | Airtac SC50 Standard Cylinder SC50X100SCB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC50 Standard Cylinder SC50X100SCB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC50 Standard Cylinder SC50X100SCB Is Used
Agricultural Gate Actuation
The rear double clevis mount and 982 N push force suit pivoting linkages on chutes or sorting gates in agricultural machinery.
Conveyor Diverters
With a 100 mm stroke and magnetic piston, this cylinder reliably actuates medium-duty diverters, with sensors confirming position.
Clamping & Staking
Delivers 1767 N at 0.9 MPa for pneumatic clamping or staking fixtures, where the clevis mount allows the cylinder to swing into position.
Is the Airtac SC50 Standard Cylinder SC50X100SCB the Right Cylinder?
For higher force, step to the 63 mm bore (1559 N push at 0.5 MPa); for a lighter, more compact unit, the 40 mm bore offers 628 N. The 100 mm stroke is well within the 1200 mm standard maximum for this bore. When replacing, match five points: 50 mm bore, 100 mm stroke, PT port thread, CB rear double clevis mounting, and the -S magnet option for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC50 Standard Cylinder SC50X100SCB FAQ
At 0.5 MPa air pressure, it pushes with 982 N and pulls with 825 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 1767 N.
Yes, the CB suffix indicates a rear double clevis (fork) mount is included. It allows the cylinder body to pivot, paired with a rod-end knuckle (M16x1.5 thread) for full articulation.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC50 Standard Cylinder SC50X100SCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.