Airtac SC50 Standard Cylinder SC50X1300SH
The AirTAC SC50 Standard Cylinder SC50X1300SH is a genuine double-acting standard air cylinder with a Ø50mm bore and 1300mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke1300 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC50 Standard Cylinder SC50X1300SH
The SC50X1300SH is a non-standard stroke AirTAC SC double-acting pneumatic cylinder delivering 982 N of push force at 0.5 MPa and up to 1767 N at the maximum operating pressure of 0.9 MPa. Its 1300 mm stroke exceeds the standard maximum for the 50 mm bore, making it a made-to-order unit for applications requiring an extended reach.
This model is equipped with a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors and high-temperature Viton seals (-H suffix) that shift the operating range from the standard -20–+70 °C to 0–+150 °C. The 20 mm diameter piston rod and 21 mm adjustable air cushion provide reliable deceleration for the long-stroke assembly.
Airtac SC50 Standard Cylinder SC50X1300SH Technical Specifications
| Model | Airtac SC50 Standard Cylinder SC50X1300SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 1300 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC50 Standard Cylinder SC50X1300SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×1300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC50 Standard Cylinder SC50X1300SH Is Used
High-Temperature Process Actuation
Viton seals enable reliable operation in ovens, autoclaves, and drying lines up to 150°C, where standard seals would degrade.
Long-Reach Material Handling
The 1300 mm stroke pushes or pulls products across wide conveyor gaps or into deep packaging stations with 1767 N of force at 0.9 MPa.
Hot-End Sensor Feedback
The built-in magnet allows CMSG/DMSG sensors to confirm end-of-stroke in hot zones without direct mechanical contact.
Is the Airtac SC50 Standard Cylinder SC50X1300SH the Right Cylinder?
Select the SC50X1300SH when you need a 50 mm bore with an extended 1300 mm reach and high-temperature capability. For higher force at the same pressure, step up to the 63 mm bore (1559 N at 0.5 MPa); for a more compact standard-stroke solution, the 40 mm bore offers 628 N at 0.5 MPa with a 1200 mm maximum standard stroke.
At 1300 mm stroke, the unsupported rod is susceptible to bending under side loads. Always use an external guide or a guided cylinder to protect the rod bearing and piston seals. For a direct replacement, match the 50 mm bore, 1300 mm stroke, PT port thread, Viton seals, and the built-in magnet for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC50 Standard Cylinder SC50X1300SH FAQ
At the maximum operating pressure of 0.9 MPa, this cylinder delivers 1767 N of push force. At the standard 0.5 MPa, it provides 982 N push and 825 N pull force.
No. As a standard double-acting cylinder, it will drift if air pressure is lost or the directional valve is centered. A pilot-operated check valve or external rod lock is required for position holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC50 Standard Cylinder SC50X1300SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.