verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC50 Standard Cylinder SC50X1500SH

The AirTAC SC50 Standard Cylinder SC50X1500SH is a genuine double-acting standard air cylinder with a Ø50mm bore and 1500mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ50 mm
  • Stroke1500 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 21 mm
$185.14 $192.64Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SC50 stroke, mounting and version on one page All SC50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SC50 Standard Cylinder SC50X1500SH

This AirTAC SC50X1500SH is a double-acting tie-rod cylinder with a 50 mm bore and an extended 1500 mm stroke, built for applications that need a long reach in high-temperature environments. The -S suffix equips it with a built-in magnet, allowing CMSG/DMSG/EMSG sensors to be mounted directly on the barrel for piston position feedback.

With a 20 mm rod and M16x1.5 knuckle thread, it generates a push force of 1767 N at the maximum operating pressure of 0.9 MPa. The -H suffix specifies Viton (FKM) seals, shifting the operating temperature range to 0 to +150 °C, making it suitable for hot or aggressive air environments. This 1500 mm stroke exceeds the standard 1200 mm maximum for 50 mm bore, making it a non-standard, made-to-order configuration.

Airtac SC50 Standard Cylinder SC50X1500SH Technical Specifications

ModelAirtac SC50 Standard Cylinder SC50X1500SH
SeriesSC standard tie-rod cylinder
Bore sizeØ50 mm
Stroke1500 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 21 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (approx.)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC50 Standard Cylinder SC50X1500SH

SCStandard tie-rod cylinder series.
50Bore size in mm.
×1500Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC50 Standard Cylinder SC50X1500SH Is Used

local_fire_department

High-Temperature Actuation

Viton seals enable reliable operation in ambient temperatures up to 150 °C, such as near ovens, autoclaves, or engine test cells.

conveyor_belt

Long-Reach Material Handling

The 1500 mm stroke is ideal for pushing or lifting products across wide conveyor gaps or into deep processing stations.

sensors

Sensor-Controlled Automation

The built-in magnet allows easy attachment of reed or solid-state sensors for end-of-stroke detection in automated sequences.

Is the Airtac SC50 Standard Cylinder SC50X1500SH the Right Cylinder?

Select the SC50 when your application requires a force around 982 N at 0.5 MPa. If you need more force, stepping up to a 63 mm bore provides 1559 N at the same pressure. For strokes of 300 mm or more, always check for side loads; an unsupported 1500 mm stroke on a 20 mm rod is susceptible to bending under lateral force. Use an external guide or linear rail to protect the rod and bearing.

For a direct replacement, match five key points: 50 mm bore, 1500 mm stroke, PT port thread, the built-in magnet (-S), and the Viton seal material (-H). This is a tie-rod cylinder and is dimensionally shorter than an ISO 15552 profile, so it is not a direct replacement for that standard.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC50 Standard Cylinder SC50X1500SH FAQ

At 0.5 MPa, it provides 982 N pushing and 825 N pulling. The maximum force at 0.9 MPa is 1767 N pushing. The theoretical maximum at 1.0 MPa is 200 kgf.

A stroke of 1500 mm on a 20 mm rod requires external guidance to prevent bending from side loads. Mount the load on a linear rail or rodless guide system, and use a floating rod coupler to connect the cylinder, ensuring it only provides push/pull force.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC50 Standard Cylinder SC50X1500SH

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SC50X1500SH and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.