verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC50 Standard Cylinder SC50X250H

The AirTAC SC50 Standard Cylinder SC50X250H is a genuine double-acting standard air cylinder with a Ø50mm bore and 250mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ50 mm
  • Stroke250 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 21 mm
$69.29 $76.79Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SC50 stroke, mounting and version on one page All SC50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SC50 Standard Cylinder SC50X250H

The SC50X250H is a double-acting pneumatic cylinder delivering 982 N of push force at 0.5 MPa and up to 1767 N at the maximum operating pressure of 0.9 MPa. Its 20 mm diameter piston rod and 21 mm adjustable air cushion provide reliable deceleration for mid-range automation tasks, while the 250 mm stroke suits clamping, pressing, and material-transfer operations.

This variant is fitted with Viton (FKM) seals, shifting the operating temperature range to 0 to +150 °C and making it suitable for hot environments or applications with aggressive media where standard TPU seals would degrade. The body length A is 150 mm, giving a total extended length of approximately 400 mm.

Airtac SC50 Standard Cylinder SC50X250H Technical Specifications

ModelAirtac SC50 Standard Cylinder SC50X250H
SeriesSC standard tie-rod cylinder
Bore sizeØ50 mm
Stroke250 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 21 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (approx.)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC50 Standard Cylinder SC50X250H

SCStandard tie-rod cylinder series.
50Bore size in mm.
×250Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC50 Standard Cylinder SC50X250H Is Used

local_fire_department

Hot Press & Molding

Viton seals allow the SC50X250H to operate continuously in press and molding equipment where ambient temperatures reach up to 150 °C, maintaining consistent 982 N clamping force.

conveyor_belt

High-Temperature Conveyor Divert

Diverts hot parts on a conveyor line with a 250 mm stroke. The 21 mm air cushion absorbs impact energy, protecting the cylinder and product at high cycle rates.

biotech

Autoclave & Sterilization Fixtures

Suitable for actuating fixtures inside autoclaves or sterilization chambers, where the 0-150 °C Viton seal rating and PT port threads ensure compatibility with high-temperature steam cycles.

Is the Airtac SC50 Standard Cylinder SC50X250H the Right Cylinder?

Choose the SC50X250H when you need a 50 mm bore cylinder with high-temperature resistance. If your force requirement is lower, stepping down to the SC40 (628 N at 0.5 MPa) can reduce air consumption; for higher force, the SC63 delivers 1559 N at the same pressure. Always match replacement cylinders on all five points: bore, stroke, PT port thread, basic mounting, and the Viton seal material.

At a 250 mm stroke, the 20 mm rod is well-supported for axial loads, but any side loading must be managed with external guides or a guided cylinder to prevent rod bending and premature bearing wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC50 Standard Cylinder SC50X250H FAQ

At 0.7 MPa operating pressure, the SC50X250H produces 1374 N of push force and 825 N of pull force. The maximum push force at 0.9 MPa is 1767 N.

No. The SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder, so it is not dimensionally interchangeable. It is a direct replacement only for another AirTAC SC50 tie-rod cylinder with the same 250 mm stroke, PT ports, and Viton seals.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC50 Standard Cylinder SC50X250H

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SC50X250H and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.