verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC50 Standard Cylinder SC50X300SH

The AirTAC SC50 Standard Cylinder SC50X300SH is a genuine double-acting standard air cylinder with a Ø50mm bore and 300mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ50 mm
  • Stroke300 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 21 mm
$76.06 $83.56Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SC50 stroke, mounting and version on one page All SC50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SC50 Standard Cylinder SC50X300SH

The AirTAC SC50X300SH is a double-acting single-rod pneumatic cylinder with a 50 mm bore and 300 mm stroke, factory-equipped with a built-in magnet and high-temperature Viton (FKM) seals. This configuration extends the operating temperature range to 0–150 °C, making it suitable for hot environments where standard seals would degrade. At the standard 0.7 MPa supply, it generates 1374 N of push force, and at the maximum operating pressure of 0.9 MPa, thrust reaches 1767 N.

With a 20 mm diameter piston rod and M16x1.5 rod thread, the SC50X300SH provides robust linear motion for medium-duty applications. The PT1/4 pneumatic ports and 21 mm adjustable air cushion at each end ensure smooth deceleration. The integrated magnet allows direct mounting of CMSG, DMSG, or EMSG sensors on the tie-rod barrel for reliable end-of-stroke detection without external brackets.

Airtac SC50 Standard Cylinder SC50X300SH Technical Specifications

ModelAirtac SC50 Standard Cylinder SC50X300SH
SeriesSC standard tie-rod cylinder
Bore sizeØ50 mm
Stroke300 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 21 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (approx.)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC50 Standard Cylinder SC50X300SH

SCStandard tie-rod cylinder series.
50Bore size in mm.
×300Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC50 Standard Cylinder SC50X300SH Is Used

local_fire_department

Foundry & Heat Treatment

Operates reliably in high-ambient-temperature environments such as foundries, kilns, and autoclaves, where standard seals would degrade.

precision_manufacturing

Automated Welding Cells

Withstands weld spatter and radiant heat in robotic welding fixtures, using the magnet for clamp confirmation.

conveyor_belt

Hot Material Handling

Positions hot workpieces or actuates gates near ovens and dryers, maintaining performance up to 150°C.

Is the Airtac SC50 Standard Cylinder SC50X300SH the Right Cylinder?

For applications requiring position sensing in hot conditions, the SC50X300SH is a ready-to-install solution. When selecting a cylinder for side-loaded or long-stroke applications, consider that the 300 mm stroke on a 20 mm rod may require external guidance to prevent bending. If higher force is needed, stepping up to the 63 mm bore provides 2805 N at 0.9 MPa. For lower force requirements, the 40 mm bore offers 1130 N. Ensure replacement cylinders match the 50 mm bore, 300 mm stroke, PT1/4 ports, and the -S magnet option to maintain sensor compatibility.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC50 Standard Cylinder SC50X300SH FAQ

At 0.5 MPa (5 bar) air pressure, the push force is 982 N and the pull force is 825 N. At the maximum 0.9 MPa operating pressure, push force increases to 1767 N.

Yes, the -S suffix indicates a built-in magnet, making it fully compatible with AirTAC CMSG, DMSG, and EMSG series reed and solid-state sensors that clamp directly onto the cylinder barrel.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC50 Standard Cylinder SC50X300SH

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SC50X300SH and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.