verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC50 Standard Cylinder SC50X300SN

The AirTAC SC50 Standard Cylinder SC50X300SN is a genuine double-acting standard air cylinder with a Ø50mm bore and 300mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ50 mm
  • Stroke300 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 21 mm
$65.36 $72.86Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SC50 stroke, mounting and version on one page All SC50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SC50 Standard Cylinder SC50X300SN

The SC50X300SN delivers 982 N of push force at 0.5 MPa and 825 N of pull force, making it a solid mid-range actuator for general industrial automation. Its 20 mm diameter piston rod and 21 mm adjustable air cushion help manage end-of-stroke deceleration across the 300 mm travel.

This model includes a built-in magnet for direct mounting of CMSG/DMSG/EMSG sensors and uses NBR (nitrile) seals, suited for standard temperature environments. The body length A is 150 mm, giving a total extended length of approximately 450 mm.

Airtac SC50 Standard Cylinder SC50X300SN Technical Specifications

ModelAirtac SC50 Standard Cylinder SC50X300SN
SeriesSC standard tie-rod cylinder
Bore sizeØ50 mm
Stroke300 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 21 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (approx.)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC50 Standard Cylinder SC50X300SN

SCStandard tie-rod cylinder series.
50Bore size in mm.
×300Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC50 Standard Cylinder SC50X300SN Is Used

conveyor_belt

Package Sorting Gates

The 300 mm stroke and 0.5 MPa force are well-suited for diverting medium-weight packages on conveyor lines, with sensor confirmation via the built-in magnet.

precision_manufacturing

Material Clamping

Provides consistent 982 N clamping force for woodworking or light metal fabrication jigs, where NBR seals offer good resistance to common shop oils.

engineering

Press-Fit Assembly

Delivers a controlled 1767 N of push force at 0.9 MPa for pressing bushings or bearings into housings in semi-automated assembly stations.

Is the Airtac SC50 Standard Cylinder SC50X300SN the Right Cylinder?

For applications needing more force, stepping up to the 63 mm bore provides 1559 N push at 0.5 MPa, while the 40 mm bore offers 628 N if a smaller footprint is required. At 300 mm of stroke, ensure the rod is not subjected to significant side loads; an external linear guide or a guided cylinder is recommended to prevent rod bearing wear and bending.

When replacing an existing cylinder, match five key points: 50 mm bore, 300 mm stroke, PT port thread, the built-in magnet (-S suffix), and the basic mounting style. This ensures a direct dimensional and functional direct.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC50 Standard Cylinder SC50X300SN FAQ

At the standard operating pressure of 0.5 MPa, it generates 982 N extending and 825 N retracting. At the maximum operating pressure of 0.9 MPa, the extending force increases to 1767 N.

Yes. The 'S' in the model code indicates a built-in magnet, allowing you to directly clamp CMSG (reed) or DMSG/EMSG (solid-state) sensors onto the barrel to detect piston position.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC50 Standard Cylinder SC50X300SN

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SC50X300SN and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.