Airtac SC50 Standard Cylinder SC50X365S
The AirTAC SC50 Standard Cylinder SC50X365S is a genuine double-acting standard air cylinder with a Ø50mm bore and 365mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke365 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC50 Standard Cylinder SC50X365S
The SC50X365S is a double-acting AirTAC SC tie-rod cylinder with a 50 mm bore and a 365 mm stroke, pre-fitted with a built-in magnet for barrel-mounted sensors. At the standard operating pressure of 0.5 MPa, it provides a push force of 982 N and a pull force of 825 N, driven by a 20 mm diameter piston rod with an M16x1.5 male thread.
This model uses PT1/4 ports and includes an adjustable air cushion (21 mm length) at both ends to decelerate the piston smoothly. The body length A is 150 mm, giving a total extended length of approximately 515 mm. The built-in magnet allows easy clamping of CMSG, DMSG, or EMSG reed and solid-state sensors directly onto the barrel for position feedback.
Airtac SC50 Standard Cylinder SC50X365S Technical Specifications
| Model | Airtac SC50 Standard Cylinder SC50X365S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 365 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC50 Standard Cylinder SC50X365S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×365 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC50 Standard Cylinder SC50X365S Is Used
Material Stops & Gates
Provides a reliable 365 mm stroke to actuate pop-up stops or divert gates on conveyor lines, with sensor feedback confirming the extended or retracted position.
Clamping & Holding
Delivers 982 N of clamping force at standard pressure, suitable for holding workpieces during light machining or assembly, with magnet sensors signaling clamp status.
Pusher & Ejector Stations
The 365 mm stroke ejects cartons or totes from a packing station onto a takeaway conveyor, using the built-in magnet for end-of-stroke detection.
Is the Airtac SC50 Standard Cylinder SC50X365S the Right Cylinder?
For applications requiring more force, stepping up to the 63 mm bore SC63 series provides 1559 N of push force at 0.5 MPa. If a shorter, more compact build is acceptable, the 40 mm bore SC40 series delivers 628 N. This 365 mm stroke model is within the 1200 mm maximum standard stroke for the 50 mm bore.
At this stroke length, avoid applying direct side loads to the unsupported piston rod, as bending moments can damage the rod bearing and seals. For guided motion, pair this cylinder with an external linear guide or consider a guided cylinder assembly. When replacing an existing unit, match five key points: 50 mm bore, 365 mm stroke, PT1/4 port thread, the basic (no bracket) mounting, and the -S magnet option for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC50 Standard Cylinder SC50X365S FAQ
At 0.5 MPa (5 bar) air pressure, the cylinder produces 982 N extending (push) and 825 N retracting (pull). At the maximum operating pressure of 0.9 MPa, the push force reaches 1767 N.
Yes. The -S suffix in the model code indicates a built-in magnet is installed in the piston. This allows you to clamp compatible AirTAC CMSG, DMSG, or EMSG sensors directly onto the cylinder barrel to detect piston position without additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC50 Standard Cylinder SC50X365S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.