Airtac SC50 Standard Cylinder SC50X565S
The AirTAC SC50 Standard Cylinder SC50X565S is a genuine double-acting standard air cylinder with a Ø50mm bore and 565mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke565 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC50 Standard Cylinder SC50X565S
The AirTAC SC50X565S is a double-acting single-rod pneumatic cylinder with a 50 mm bore and a non-standard 565 mm stroke, delivering 1374 N of push force at 0.7 MPa. Its 20 mm diameter piston rod and 21 mm adjustable air cushion provide reliable deceleration, while the built-in magnet allows direct mounting of CMSG/DMSG/EMSG sensors for end-of-stroke detection.
This model uses a PT1/4 port and an M16x1.5 rod thread, with a body length A of 150 mm. As a genuine AirTAC tie-rod cylinder, it is shorter than an ISO 15552 profile and is designed for filtered air applications where position sensing is required along the full stroke length.
Airtac SC50 Standard Cylinder SC50X565S Technical Specifications
| Model | Airtac SC50 Standard Cylinder SC50X565S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 565 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC50 Standard Cylinder SC50X565S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×565 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC50 Standard Cylinder SC50X565S Is Used
Long-Stroke Part Transfer
Moves components 565 mm between conveyor lines, with magnetic sensors confirming full extension and retraction for interlock safety.
Automated Gluing Station
Pushes a glue applicator head across a wide panel at 0.7 MPa, using the 1374 N force for consistent bead pressure, with sensor feedback for cycle start.
Pallet Dispenser Gate
Acts as a long-stroke stop gate in a gravity conveyor, retracting 565 mm to release a single pallet. The magnet confirms gate position before the next cycle.
Is the Airtac SC50 Standard Cylinder SC50X565S the Right Cylinder?
Select the SC50X565S when your application needs the 50 mm bore force class (1374 N push at 0.7 MPa) and a precise 565 mm stroke with magnetic piston sensing. If you need more force, step up to the 63 mm bore (2182 N at 0.7 MPa); for a lighter load, the 40 mm bore offers 879 N. Always match replacement cylinders on five points: bore, stroke, PT port thread, the built-in magnet (-S), and basic mounting.
For this 565 mm stroke, the unsupported rod is extended significantly. Avoid direct side loads on the rod end; use an external linear guide or rod-alignment coupler to prevent bending stress on the rod bearing and piston seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC50 Standard Cylinder SC50X565S FAQ
At 0.7 MPa operating pressure, the push force is 1374 N. The maximum push force at the 0.9 MPa upper limit is 1767 N. Pull force at 0.7 MPa is 825 N.
No. The SC series is a tie-rod cylinder, not an ISO 15552 profile. It is physically shorter. Use only AirTAC SC-specific mounting accessories (e.g., LB, FA, FB, CA, CB, TC) with the F-SC50 prefix to ensure correct fit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC50 Standard Cylinder SC50X565S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.