Airtac SC50 Standard Cylinder SC50X600SLB
The AirTAC SC50 Standard Cylinder SC50X600SLB is a genuine double-acting standard air cylinder with a Ø50mm bore and 600mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke600 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC50 Standard Cylinder SC50X600SLB
The SC50X600SLB is a double-acting tie-rod cylinder with a 50 mm bore and 600 mm stroke, delivering 982 N of push force at 0.5 MPa and up to 1767 N at 0.9 MPa. This model includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, and is supplied with LB axial foot mounts (F-SC50LB) for secure surface installation.
The 20 mm diameter piston rod and 21 mm adjustable air cushion at each end provide reliable deceleration for mid-range automation tasks. With a body length A of 150 mm, the total extended length is approximately 750 mm. The standard PT1/4 port and TPU seals suit operating temperatures from -20 to +70 °C.
Airtac SC50 Standard Cylinder SC50X600SLB Technical Specifications
| Model | Airtac SC50 Standard Cylinder SC50X600SLB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC50 Standard Cylinder SC50X600SLB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC50 Standard Cylinder SC50X600SLB Is Used
Material Stop Gates
The 600 mm stroke and 982 N push force at 0.5 MPa effectively actuate stop gates on conveyor lines, halting totes or pallets with the built-in magnet confirming gate position.
Clamping & Fixturing
Provides consistent clamping force for woodworking or metal fabrication jigs. The LB foot mount allows stable, rigid mounting to a machine bed, with sensor feedback for cycle start.
Diverter Arms
Operates a 600 mm throw diverter arm in a sorting system. The adjustable cushion manages the inertial load of the arm at end-of-stroke, preventing shock and noise.
Is the Airtac SC50 Standard Cylinder SC50X600SLB the Right Cylinder?
Choose the SC50 for applications needing up to 982 N at 0.5 MPa. If your force requirement is lower, the 40 mm bore provides 628 N; for higher demands, the 63 mm bore offers 1559 N at the same pressure. This 600 mm stroke is within the 1200 mm maximum standard stroke for the 50 mm bore.
At this stroke length, ensure the rod is not subjected to significant side loads, which can cause bending or premature bearing wear. Use an external guide or a guided cylinder for unsupported loads. For a direct replacement, match the 50 mm bore, 600 mm stroke, PT1/4 ports, LB foot mounting, and integrated magnet sensor capability.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC50 Standard Cylinder SC50X600SLB FAQ
At 0.7 MPa operating pressure, the push force on the piston rod extension is 1374 N. The pull force during retraction is 825 N at 0.5 MPa, due to the reduced piston area on the rod side.
Yes, provided the replacement is another AirTAC SC50 tie-rod cylinder. You must match the 50 mm bore, 600 mm stroke, PT1/4 ports, LB foot mounting accessory, and the integrated magnet (-S) for sensor compatibility. This is not an ISO 15552 cylinder and is dimensionally shorter.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC50 Standard Cylinder SC50X600SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.