Airtac SC50 Standard Cylinder SC50X620S
The AirTAC SC50 Standard Cylinder SC50X620S is a genuine double-acting standard air cylinder with a Ø50mm bore and 620mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke620 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC50 Standard Cylinder SC50X620S
The AirTAC SC50X620S is a double-acting tie-rod cylinder delivering 982 N of push force at 0.5 MPa and up to 1767 N at 0.9 MPa. With a 50 mm bore, 20 mm rod, and a non-standard 620 mm stroke, it suits applications needing extended reach beyond the standard 500 mm range. The built-in magnet allows direct mounting of CMSG/DMSG/EMSG sensors for piston position feedback.
This model features a PT1/4 port, M16x1.5 rod thread, and a 21 mm adjustable air cushion to decelerate the piston smoothly at stroke end. The body length A is 150 mm, giving a total extended length of approximately 770 mm. For strokes over 300 mm, ensure the rod is guided externally if side loads are present to prevent bending or bearing wear.
Airtac SC50 Standard Cylinder SC50X620S Technical Specifications
| Model | Airtac SC50 Standard Cylinder SC50X620S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 620 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC50 Standard Cylinder SC50X620S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×620 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC50 Standard Cylinder SC50X620S Is Used
Long-Reach Material Transfer
The 620 mm stroke pushes or pulls parts across wide conveyor gaps or between distant stations, with magnetic sensors confirming end-of-travel.
Extended Clamping & Fixturing
Applies 1767 N of clamping force at 0.9 MPa over a long stroke to secure large workpieces, with sensor feedback ensuring the clamp is fully engaged.
Automated Sorting Gates
Operates tall diverter gates or flaps in sorting systems, using the built-in magnet for position verification at both ends of the 620 mm stroke.
Is the Airtac SC50 Standard Cylinder SC50X620S the Right Cylinder?
Choose the SC50X620S when your application requires a 50 mm bore with a 620 mm reach and sensor-ready position sensing. If 982 N at 0.5 MPa is insufficient, stepping up to the 63 mm bore (SC63) provides 1559 N at the same pressure. For a shorter standard stroke, the SC50X500 offers a direct alternative within the standard range.
This non-standard stroke cylinder must be matched on five points for replacement: 50 mm bore, 620 mm stroke, PT1/4 port thread, the built-in magnet (-S suffix), and the basic (no bracket) mounting. The long 620 mm stroke requires careful alignment; use an external guide or rod support to protect the rod bearing from bending moments under side load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC50 Standard Cylinder SC50X620S FAQ
At 0.5 MPa, the push force is 982 N and the pull force is 825 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 1767 N. The theoretical maximum at 1.0 MPa is 200 kgf.
Match five key specifications: 50 mm bore, 620 mm stroke, PT1/4 port thread, built-in magnet for sensors (-S suffix), and basic mounting. This is a non-standard stroke, so confirm the overall extended length of ~770 mm fits your machine. Ensure the rod is externally guided if side loads exist.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC50 Standard Cylinder SC50X620S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.