The AirTAC SC50 Standard Cylinder SC50X710 is a genuine double-acting standard air cylinder with a Ø50mm bore and 710mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC50X710 is a double-acting single-rod pneumatic cylinder with a 50 mm bore and an extended 710 mm stroke, ordered as a non-standard length beyond the standard 1200 mm maximum for this bore. It generates 982 N of push force at 0.5 MPa and up to 1767 N at the maximum operating pressure of 0.9 MPa, making it a capable mid-range linear actuator.
This model features a 20 mm diameter piston rod with M16x1.5 male threads and PT1/4 ports. The cylinder body length A is 150 mm, and the total extended length is approximately 860 mm. It includes an adjustable air cushion (21 mm length) to decelerate the piston near stroke end, reducing impact noise and wear.
| Model | Airtac SC50 Standard Cylinder SC50X710 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 710 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×710 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Pushes or pulls components across a 710 mm span on packaging or assembly lines where a standard stroke is insufficient.
Operates a tall gate or stop mechanism on a wide conveyor, using the full stroke to clear the material path completely.
Provides linear motion for adjusting chutes, diverters, or linkages on farming equipment requiring a mid-range force actuator.
Select the SC50 bore for applications needing around 982 N of force at standard plant air. If your load requires more thrust, stepping up to the SC63 bore provides 1559 N at 0.5 MPa. For a shorter, standard stroke within the same force class, consider the SC50X500 which is readily available.
For this 710 mm stroke, side-load management is critical. An unsupported 20 mm rod extending over 700 mm is susceptible to bending under lateral forces. Use an external linear guide or rod support to ensure the rod bearing is not subjected to bending moments. When replacing an existing cylinder, match five points: 50 mm bore, 710 mm stroke, PT1/4 port thread, basic (no accessory) mounting, and no magnet.
Quick checklist
At 0.5 MPa, the push force is 982 N and the pull force is 825 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 1767 N. The theoretical maximum force at 1.0 MPa is 200 kgf.
No, the maximum standard stroke for a 50 mm bore SC cylinder is 1200 mm. A 710 mm stroke is a non-standard, made-to-order length. Ensure your application requires this exact dimension, as it may have a longer lead time than standard strokes like 700 mm.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.