Airtac SC50 Standard Cylinder SC50X760
The AirTAC SC50 Standard Cylinder SC50X760 is a genuine double-acting standard air cylinder with a Ø50mm bore and 760mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ50 mm
- Stroke760 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC50 Standard Cylinder SC50X760
The AirTAC SC50X760 is a double-acting tie-rod cylinder delivering 982 N of push force at 0.5 MPa (1767 N at 0.9 MPa). With a 50 mm bore and a 20 mm diameter piston rod, it is sized for medium-duty clamping, pressing, and transfer tasks that require a 760 mm linear stroke.
This model features an adjustable pneumatic cushion (21 mm length) at both ends to decelerate the piston smoothly, reducing end-of-stroke impact. The body length A is 150 mm, giving a total extended length of approximately 910 mm. Ports are PT1/4 with an M16x1.5 rod thread, and the standard TPU seals suit operating temperatures from -20 to +70 °C.
Airtac SC50 Standard Cylinder SC50X760 Technical Specifications
| Model | Airtac SC50 Standard Cylinder SC50X760 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 760 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC50 Standard Cylinder SC50X760
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×760 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC50 Standard Cylinder SC50X760 Is Used
Part Transfer
Moves components 760 mm between conveyor lanes or workstations in automated assembly lines, using the 982 N push force to shift moderate payloads reliably.
Clamping & Holding
Applies consistent clamping pressure in woodworking or welding fixtures, where the 50 mm bore provides ample force without damaging delicate assemblies.
Material Ejection
Ejects finished parts from injection molding or stamping dies, utilizing the full 760 mm stroke to clear the tooling area completely.
Is the Airtac SC50 Standard Cylinder SC50X760 the Right Cylinder?
Choose the SC50 when your application needs around 982 N of force at standard plant pressure. If you need more force, stepping up to the SC63 bore provides 1559 N at 0.5 MPa; for a lighter, more compact solution, the SC40 delivers 628 N. For this 760 mm stroke, ensure the rod is not subjected to significant side loading—long, unsupported strokes can cause rod bending. Use an external linear guide or a guided cylinder if side forces are present.
For a direct replacement, match five key points: 50 mm bore, 760 mm stroke, PT1/4 port thread, basic (no bracket) mounting, and the absence of a built-in magnet. This ensures dimensional and performance interchangeability with an existing AirTAC SC50X760 tie-rod cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC50 Standard Cylinder SC50X760 FAQ
At 0.5 MPa (5 bar) air pressure, the push force is 982 N and the pull force is 825 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 1767 N. The theoretical maximum at 1.0 MPa is 200 kgf.
It is a direct fit for an AirTAC SC50X760 with PT ports and basic mounting. To confirm compatibility with another brand, verify the bore (50 mm), stroke (760 mm), port thread (PT1/4), rod thread (M16x1.5), and overall extended length (approx. 910 mm). Mounting hole patterns may differ between manufacturers.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC50 Standard Cylinder SC50X760
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.