The AirTAC Airtac SC50 Standard Cylinder SC50X960SH is a genuine double-acting standard air cylinder with a Ø50mm bore and 960mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC50X960SH is a double-acting pneumatic cylinder delivering 982 N of push force at 0.5 MPa and up to 1767 N at the maximum operating pressure of 0.9 MPa. With a 50 mm bore, 20 mm piston rod, and a long 960 mm stroke, it is built for applications needing extended linear reach, supported by a 150 mm body length.
This variant is configured with a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, and Viton (FKM) seals (-H), shifting the operating temperature range to 0 to +150 °C for high-heat environments. The standard PT1/4 port and M16x1.5 rod thread ensure straightforward pneumatic connections.
| Model | Airtac SC50 Standard Cylinder SC50X960SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 960 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (approx.) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×960 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Viton seals enable reliable operation in ovens, autoclaves, or foundry equipment where ambient temperatures reach up to 150°C, a range standard seals cannot withstand.
The 960 mm stroke is ideal for pushing or lifting components across a wide conveyor gap, with sensor feedback from the built-in magnet confirming full extension and retraction.
Combining the -S magnet with CMSG sensors provides precise, contactless end-of-stroke detection for automated clamping fixtures in CNC machining or welding cells.
For a 50 mm bore at 0.5 MPa, the SC50X960SH provides 982 N. If your load demands more force, stepping up to an SC63 bore offers 1559 N at the same pressure. For a lighter, more compact solution, the SC40 bore generates 628 N. This cylinder is a genuine AirTAC component, identifiable by its tie-rod construction.
At a 960 mm stroke, the unsupported rod is susceptible to bending under side loads. Always use an external guide or linear rail to absorb transverse forces, preventing premature rod bearing and seal wear. For a direct replacement, match the 50 mm bore, 960 mm stroke, PT1/4 port, built-in magnet, and this model's specific Viton seal material.
Quick checklist
At 0.7 MPa operating pressure, the theoretical push force is 1374 N. The pull force on the rod-retract stroke is 825 N at 0.5 MPa, due to the area reduction from the 20 mm piston rod.
No. The SC50X960SH is a double-acting cylinder and does not lock or hold position on loss of pressure. The piston will drift. To safely hold a load, you must add an external rod brake, a mechanical lock, or a pilot-operated check valve in the circuit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.