Airtac SC80 Standard Cylinder SC80X100SY
The AirTAC SC80 Standard Cylinder SC80X100SY is a genuine double-acting standard air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X100SY
The SC80X100S is an 80 mm bore, 100 mm stroke double-acting tie-rod cylinder from the AirTAC SC series, factory-equipped with a built-in magnet for direct mounting of CMSG/DMSG/EMSG sensors. With a 25 mm piston rod and PT3/8 ports, it generates 2513 N of push force at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa.
This model’s 100 mm stroke is well within the 1500 mm maximum standard stroke for the 80 bore, making it a standard, readily available configuration. The adjustable air cushion at each end (28 mm length) decelerates the piston smoothly, reducing end-of-stroke impact. Body length A is 182 mm, giving a total extended length of approximately 282 mm.
Airtac SC80 Standard Cylinder SC80X100SY Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X100SY |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X100SY
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X100SY Is Used
Conveyor Diverter
The 80 mm bore provides ample force to actuate a diverter gate on a package conveyor, reliably sorting cartons at a standard 0.5-0.7 MPa plant air pressure.
Clamping & Stamping
Generates up to 4523 N of clamping force for a welding fixture or light stamping press, with the built-in magnet enabling end-of-stroke confirmation via a reed switch.
Industrial Gate Actuator
Powers the opening and closing of a safety gate or hopper door, where the tie-rod construction provides robust, serviceable performance in a dusty environment.
Is the Airtac SC80 Standard Cylinder SC80X100SY the Right Cylinder?
Select the SC80 when the 50 bore’s 982 N (at 0.5 MPa) is insufficient for the load. If your application requires higher force, the SC100 bore provides 3927 N at the same pressure. For this 100 mm stroke, side loading is typically not a primary concern, but always align the rod axially with the load to prevent premature bearing wear.
To replace an existing unit, match five key points: 80 mm bore, 100 mm stroke, PT3/8 port thread, the built-in magnet (-S suffix for sensor compatibility), and the basic mounting style. This is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X100SY FAQ
At 0.7 MPa operating pressure, the SC80X100S double-acting cylinder produces a push force of 3518 N. The pull force at the same pressure is 3175 N, accounting for the area of the 25 mm piston rod.
Yes. The -S suffix in the model code SC80X100S indicates a built-in magnet is fitted inside the piston. This allows AirTAC CMSG, DMSG, or EMSG sensors to be clamped directly onto the barrel for non-contact position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X100SY
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.