Airtac SC80 Standard Cylinder SC80X700FA
The AirTAC Airtac SC80 Standard Cylinder SC80X700FA is a genuine double-acting standard air cylinder with a Ø80mm bore and 700mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke700 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X700FA
The AirTAC SC80X700FA is an 80 mm bore double-acting tie-rod cylinder with a 700 mm stroke, delivering a push force of 2513 N at 0.5 MPa and up to 4523 N at 0.9 MPa. Its 25 mm diameter piston rod and 28 mm adjustable air cushion provide reliable deceleration for mid-to-heavy linear motion tasks.
This model is configured with a front rectangular flange (FA) for rigid panel mounting, using accessory F-SC80FA. The standard PT1/8 port thread and TPU seals suit operating temperatures from -20 to +70 °C. The total extended body length is approximately 882 mm (body length A of 182 mm plus the 700 mm stroke).
Airtac SC80 Standard Cylinder SC80X700FA Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X700FA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X700FA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X700FA Is Used
Mid-Span Conveyor Divert
The 700 mm stroke and 2513 N push force at 0.5 MPa suit long-reach diverter gates on packaging lines, pushing products across a wide conveyor belt.
Panel Clamping Press
Front flange mount (FA) secures the cylinder to a machine frame for a 700 mm clamping stroke on wood or composite panel presses, using the full 4523 N at 0.9 MPa.
Pallet Layer Transfer
Transfers a full layer of boxes onto a pallet stacker. The long 700 mm stroke reaches across the pallet width, while the tie-rod design handles repetitive industrial cycling.
Is the Airtac SC80 Standard Cylinder SC80X700FA the Right Cylinder?
Select the SC80 when the SC63's 1559 N push force at 0.5 MPa is insufficient; stepping up to this 80 mm bore provides a 61% force increase. For higher thrust still, the SC100 bore offers 3927 N at the same pressure. Always match replacement cylinders on five points: bore, stroke, port thread (PT), front flange mounting (FA), and the absence of a magnet.
At a 700 mm stroke, the 25 mm rod is extended significantly. Avoid unguided side loads that can bend the rod or damage the bearing; use an external linear guide or a guided cylinder assembly when the load is not perfectly axial.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X700FA FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No. The SC series is a tie-rod cylinder and is shorter than an ISO 15552 cylinder, so it is not dimensionally interchangeable. Replace it with another AirTAC SC80 tie-rod cylinder matching the 700 mm stroke, PT port, and FA front flange mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X700FA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.