The AirTAC AirTAC SDA16X15S Compact Cylinder | 16mm Bore is a genuine double-acting COMPACT (thin) air cylinder with a Ø16mm bore and 15mm stroke, M5×0.8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The AirTAC SDA16X15S is a double-acting single-rod compact cylinder engineered for tight spaces. It produces 100.5 N of push force and 86.4 N of pull force at 0.5 MPa. The short riveted body significantly reduces axial mounting depth compared to round-body alternatives, making it ideal for dense machinery layouts.
This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. End-of-stroke deceleration is handled by a fixed NBR bumper, not an adjustable cushion, so external shock absorbers are recommended for high-energy cycles. The hard-anodized 16 mm bore pairs with a 6 mm rod and M5x0.8 port.
| Model | AirTAC SDA16X15S Compact Cylinder | 16mm Bore |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø16 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod end thread | M3×0.5 female / M5×0.8 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 50 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | — |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Positions a small routing spindle across dense electronic panels where the 15 mm stroke and minimal axial footprint prevent frame collisions.
Actuates a lightweight deflector flap to sort small plastic bottles on a packaging line, utilizing the 100.5 N push force at 0.5 MPa.
Toggles a precision fluid nozzle for reagent dosing, relying on the integrated magnet to trigger an electronic switch for exact volume metering.
For sizing context, stepping down to the SDA12 yields 56.5 N of push at 0.5 MPa, while stepping up to the SDA20 provides 157.1 N. This 16 mm bore offers a safe working load of roughly 60 N (about 60% of its 100.5 N capacity) and can vertically lift approximately 5.1 kg with a 2:1 safety margin. Note that a plain cylinder drifts when air is lost or a valve is centered; the fixed bumper only decelerates near stroke end rather than locking the load, so apply an external rod lock or pilot-operated check valve if position holding is required. Confirm ordering essentials: 16 mm bore, 15 mm stroke, M5x0.8 port, female M3x0.5 rod thread, and the -S magnet.
Quick checklist
At 0.5 MPa it provides 100.5 N push and 86.4 N pull. At 0.7 MPa it provides 140.7 N push and 121 N pull. The theoretical maximum push is 21 kgf at 1.0 MPa, with an operating pressure range of 0.15-1.0 MPa.
It uses a fixed NBR bumper at each end to decelerate the piston, which is not an adjustable air cushion. If you need to hold a load without live air pressure, the piston will drift, so you must add an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.