The AirTAC SDA20X35BH Compact Cylinder | 20mm Bore is a genuine double-acting COMPACT (thin) air cylinder with a Ø20mm bore and 35mm stroke, M5×0.8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The AirTAC SDA20X35BH is a double-acting single-rod compact cylinder engineered for tight machinery footprints. Its riveted assembly minimizes axial mounting depth, delivering 157.1 N of push force at 0.5 MPa while operating at speeds between 30-500 mm/s.
This specific configuration includes a male M6x1.0 piston rod end for direct load coupling, paired with high-temperature fluororubber (FKM) seals. The unit lacks a piston magnet, meaning magnetic position sensing is not supported on this SKU. End-stroke deceleration relies strictly on a fixed NBR bumper rather than an adjustable air cushion.
| Model | AirTAC SDA20X35BH Compact Cylinder | 20mm Bore |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø20 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod end thread | M4×0.7 female / M6×1.0 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 90 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 20 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Actuates the cutting head feed on an electronics assembly line, utilizing the 35mm stroke and FKM seals to resist ambient flux vapors while pushing with 157.1 N at 0.5 MPa.
Provides the precise downward clamping force on a small thermoforming line, where the short riveted body conserves vertical machine space and the male M6 thread secures the heated platen.
When sizing this 20mm bore actuator, consider stepping down to the SDA16 which yields 100.5 N of push at 0.5 MPa, or stepping up to the SDA25 which provides 245.4 N. To order, confirm the 35mm stroke, M5x0.8 port, male M6 rod thread, and the FKM seal option.
Because this is a standard double-acting cylinder, it will not hold a load if air pressure drops or the valve is centered. The internal NBR bumper only decelerates the piston near the stroke ends and does not function as a locking brake. If your application requires position holding upon air loss, you must integrate an external rod lock or a pilot-operated check valve.
Quick checklist
This 20mm bore double-acting cylinder generates a push force of 157.1 N and a pull force of 131.9 N at 0.5 MPa. At 0.7 MPa, the push force is 219.9 N. The theoretical maximum push force is 32 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa and a speed range of 30-500 mm/s.
No, this specific SKU lacks the internal piston magnet, so it cannot support AirTAC reed or electronic switches. Additionally, it uses a fixed NBR bumper at each end to absorb end-stop impact; it does not have an adjustable air cushion. For high-speed operations, you should add an external shock absorber or slow down the approach speed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.