The AirTAC SDA20X60 Compact Cylinder | 20mm Bore is a genuine double-acting COMPACT (thin) air cylinder with a Ø20mm bore and 60mm stroke, M5×0.8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The AirTAC SDA20X60 is a double-acting single-rod compact cylinder engineered to deliver 157.1 N of push force and 131.9 N of pull force at 0.5 MPa. Its riveted assembly merges the barrel, rear cover, piston and rod into a highly abbreviated unit, drastically reducing axial mounting depth where a conventional round-body actuator would be too long. The hard-anodized bore wall minimizes friction, while the integrated two-way piston seal maintains consistent pressure separation.
This specific configuration features a 60 mm stroke driven by an 8 mm piston rod, operating at speeds from 30 to 500 mm/s. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorption. Because this SKU lacks the S option, it has no piston magnet and cannot support position sensing.
| Model | AirTAC SDA20X60 Compact Cylinder | 20mm Bore |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø20 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod end thread | M4×0.7 female / M6×1.0 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 90 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Routes populated circuit boards by shifting the cutting tool carriage with precise 60 mm travel, relying on the 8 mm rod to resist cutting vibration.
Tucks the minor flaps of small cardboard shipping boxes on a continuous conveyor, utilizing the 157.1 N extend force to overcome light cardboard resistance.
Moves a volumetric pipette head down into reagent trays within a tight analytical instrument chassis where the abbreviated riveted body saves critical axial space.
When sizing this 20 mm bore actuator, evaluate your force margins both ways: stepping down to the SDA16 provides 100.5 N of push at 0.5 MPa, while stepping up to the SDA25 yields 245.4 N. To finalize your order, confirm the 60 mm stroke, M5x0.8 port, female M4x0.7 rod thread, and the absence of a sensor magnet. If your process demands position holding upon air loss, note that the piston will drift; an external rod lock or pilot-operated check valve is required for secure load management.
Quick checklist
This double-acting cylinder generates 157.1 N push and 131.9 N pull at 0.5 MPa, increasing to 219.9 N push and 184.7 N pull at 0.7 MPa. The theoretical maximum push force is 32 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and travels at 30 to 500 mm/s.
End stops rely solely on a fixed NBR bumper to decelerate the piston; there is no field-adjustable air cushion, so high-speed cycles may need an external shock absorber. Additionally, this specific SKU lacks the S magnet option, meaning it cannot accept AirTAC reed or electronic switches for position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.