verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDA Series · Compact Cylinder

AirTAC SDA20X65S Compact Cylinder | 20mm Bore

The AirTAC SDA20X65S Compact Cylinder | 20mm Bore is a genuine double-acting COMPACT (thin) air cylinder with a Ø20mm bore and 65mm stroke, M5×0.8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.

  • BoreØ20 mm
  • Stroke65 mm
  • Port sizeM5×0.8
  • Acting typeDouble acting
  • Rod threadM4×0.7 (F) / M6×1.0 (B)
  • CushionFixed NBR bumper (both ends)
$35.72 Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDA20 stroke, mounting and version on one page All SDA20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the AirTAC SDA20X65S Compact Cylinder | 20mm Bore

The AirTAC SDA20X65S is a double-acting, single-rod compact cylinder engineered for tight axial spaces. It delivers 157.1 N of push force and 131.9 N of pull force at 0.5 MPa. The riveted unibody design merges the barrel, rear cover, piston, and rod to drastically reduce overall length compared to conventional round-body units, saving valuable machine footprint.

This 65 mm stroke model includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. It features an 8 mm rod, an M5x0.8 port, and a female M4x0.7 rod-end thread. Deceleration at the stroke ends relies on a fixed NBR bumper, which is not field-adjustable, rather than a pneumatic cushion.

AirTAC SDA20X65S Compact Cylinder | 20mm Bore Technical Specifications

ModelAirTAC SDA20X65S Compact Cylinder | 20mm Bore
SeriesSDA compact (thin) cylinder
Bore sizeØ20 mm
Stroke65 mm
Acting typeDouble acting
Port sizeM5×0.8
Rod end threadM4×0.7 female / M6×1.0 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)
Max standard strokeUp to 90 mm

Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: AirTAC SDA20X65S Compact Cylinder | 20mm Bore

SDACompact (thin) double-acting cylinder series.
20Bore size in mm.
×65Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).

Where the AirTAC SDA20X65S Compact Cylinder | 20mm Bore Is Used

conveyor_belt

Package Diverters

Pushes small cartons at 90 degrees on a packaging line using 157.1 N of extend force, with the short body fitting neatly between conveyor rollers.

precision_manufacturing

PCB Ejection

Extends 65 mm to push populated circuit boards out of a testing fixture, relying on the 8 mm rod and built-in magnet for position confirmation.

science

Lab Sample Handling

Moves lightweight sample trays horizontally within analytical instruments where axial depth is restricted and 8 kg of vertical lift margin is sufficient.

Is the AirTAC SDA20X65S Compact Cylinder | 20mm Bore the Right Cylinder?

When sizing this unit, stepping down to the SDA16 provides 100.5 N of push force at 0.5 MPa, while moving up to the SDA25 yields 245.4 N at the same pressure. To order, confirm the 20 mm bore, 65 mm stroke, M5x0.8 port, female rod thread, and the required magnetic sensor option. Note that a standard cylinder drifts if air pressure is lost or the valve is centered; the fixed bumper only slows the piston near the end of travel and does not function as a locking brake. For suspended loads, an external rod lock or pilot-operated check valve is necessary.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

AirTAC SDA20X65S Compact Cylinder | 20mm Bore FAQ

At 0.5 MPa this cylinder provides 157.1 N of push and 131.9 N of pull force. At 0.7 MPa it provides 219.9 N of push and 184.7 N of pull. The theoretical maximum push force is 32 kgf at 1.0 MPa, with an operating pressure range of 0.15-1.0 MPa.

It uses a fixed NBR bumper at each end to decelerate the piston, which is not an adjustable air cushion. For high-energy cycles, you should add an external shock absorber. The -S option provides a piston magnet compatible with AirTAC reed or electronic switches mounted in the body grooves.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDA Compact Cylinders

Request a Quote for AirTAC SDA20X65S Compact Cylinder | 20mm Bore

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDA20X65S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.