verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDA Series · Compact Cylinder

AirTAC SDA25X10B Compact Cylinder | 25mm Bore

The AirTAC SDA25X10B Compact Cylinder | 25mm Bore is a genuine double-acting COMPACT (thin) air cylinder with a Ø25mm bore and 10mm stroke, M5×0.8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.

  • BoreØ25 mm
  • Stroke10 mm
  • Port sizeM5×0.8
  • Acting typeDouble acting
  • Rod threadM5×0.8 (F) / M8×1.25 (B)
  • CushionFixed NBR bumper (both ends)
$24.82 Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDA25 stroke, mounting and version on one page All SDA25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the AirTAC SDA25X10B Compact Cylinder | 25mm Bore

The AirTAC SDA25X10B is a double-acting single-rod compact cylinder engineered for tight axial spaces. It generates 245.4 N of push force and 206.2 N of pull force at 0.5 MPa. The riveted body design significantly reduces overall mounting depth compared to traditional round-body units, making it highly effective for shrinking machine footprints where every millimeter counts.

This specific SKU features a male M8x1.25 piston rod thread for robust mechanical coupling to your load. It operates at speeds between 30-500 mm/s and relies on a fixed NBR bumper at each end to decelerate the stroke. Because this unit lacks the -S magnet option, it cannot host magnetic position sensors.

AirTAC SDA25X10B Compact Cylinder | 25mm Bore Technical Specifications

ModelAirTAC SDA25X10B Compact Cylinder | 25mm Bore
SeriesSDA compact (thin) cylinder
Bore sizeØ25 mm
Stroke10 mm
Acting typeDouble acting
Port sizeM5×0.8
Rod end threadM5×0.8 female / M8×1.25 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)
Max standard strokeUp to 120 mm

Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N—
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: AirTAC SDA25X10B Compact Cylinder | 25mm Bore

SDACompact (thin) double-acting cylinder series.
25Bore size in mm.
×10Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).

Where the AirTAC SDA25X10B Compact Cylinder | 25mm Bore Is Used

precision_manufacturing

PCB Edge Guiding

Provides precise 10 mm lateral shifts on a conveyor to align printed circuit boards before optical inspection, utilizing the compact 25 mm footprint to fit within dense electronics assembly machinery.

packaging

Carton Flap Folding

Delivers the 245.4 N push required to tuck minor flaps on small pharmaceutical cartons at high cycle rates, with the fixed NBR bumper absorbing the rapid end-stop impact.

view_module

Pick-and-Place Ejection

Acts as a short-stroke diverter to knock accepted components off a test tray into a packaging chute, where the male M8x1.25 thread securely mounts the custom ejection fork.

Is the AirTAC SDA25X10B Compact Cylinder | 25mm Bore the Right Cylinder?

When sizing this unit, consider stepping down to the SDA20, which provides 157.1 N of push at 0.5 MPa, or moving up to the SDA32, which yields 402.1 N at the same pressure. Confirm your ordering essentials: 25 mm bore, 10 mm stroke, M5x0.8 port, male M8x1.25 rod thread, and no sensor magnet. Note that a standard cylinder drifts when air is lost or a valve is centered; the fixed bumper only decelerates near the stroke end and does not function as a locking brake. To hold a load securely without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

AirTAC SDA25X10B Compact Cylinder | 25mm Bore FAQ

At 0.5 MPa, this 25 mm bore cylinder provides 245.4 N push and 206.2 N pull. At 0.7 MPa, push increases to 343.6 N and pull to 288.6 N. The theoretical maximum push is 50 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, with a proof pressure of 1.5 MPa, and supports speeds of 30-500 mm/s.

No. This model uses a fixed NBR bumper at each end to decelerate the piston, which is not a field-adjustable air cushion; for high-energy cycles you should slow the approach or add an external shock absorber. Additionally, this specific SKU lacks the -S piston magnet, so it cannot support reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDA Compact Cylinders

Request a Quote for AirTAC SDA25X10B Compact Cylinder | 25mm Bore

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDA25X10B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.