The AirTAC SDA25X70B Compact Cylinder | 25mm Bore is a genuine double-acting COMPACT (thin) air cylinder with a Ø25mm bore and 70mm stroke, M5×0.8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The AirTAC SDA25X70B is a double-acting, single-rod compact cylinder engineered to deliver 245.4 N of push force and 206.2 N of pull force at 0.5 MPa. Its riveted assembly significantly reduces axial mounting depth compared to conventional round-body units, making it highly effective for machinery where footprint minimization is critical. The unit operates at speeds between 30 and 500 mm/s.
This specific configuration includes a male M8x1.25 piston rod thread for secure mechanical coupling to your load. The bore features a hard-anodized inner wall and relies on a fixed NBR bumper at each end to decelerate the stroke. Because this SKU lacks the -S option, it does not have a piston magnet and cannot support position sensing.
| Model | AirTAC SDA25X70B Compact Cylinder | 25mm Bore |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø25 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod end thread | M5×0.8 female / M8×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 25 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Actuates a routing flap on a logistics sorting line, utilizing the 70 mm stroke to redirect small parcels efficiently without consuming excessive frame width.
Drives the folding mechanism on a packaging machine, using the 245.4 N extend force to tuck corrugated flaps prior to tape application.
Secures circuit boards during automated electrical testing, where the male M8x1.25 rod end mounts directly to a custom probe plate.
When sizing this actuator, evaluate your force requirements carefully. Stepping down to the SDA20 provides 157.1 N of push at 0.5 MPa, while moving up to the SDA32 yields 402.1 N. To finalize your order, confirm the 25 mm bore, 70 mm stroke, M5x0.8 port, and the male M8x1.25 rod thread. Note that a standard cylinder will drift and lose its position if air pressure drops; to maintain a vertical load safely, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa, the push force is 245.4 N and the pull force is 206.2 N. At 0.7 MPa, the push force is 343.6 N and the pull force is 288.6 N. The theoretical maximum push force is 50 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a proof pressure of 1.5 MPa.
No, this specific SKU does not include a piston magnet. To use AirTAC reed or electronic switches, you must select the -S option. Additionally, this model uses a fixed NBR bumper to decelerate at stroke end, which is not an adjustable air cushion.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.