verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDA Series · Compact Cylinder

AirTAC SDA32X40N Compact Cylinder | 32mm Bore

The AirTAC SDA32X40N Compact Cylinder | 32mm Bore is a genuine double-acting COMPACT (thin) air cylinder with a Ø32mm bore and 40mm stroke, PT1/8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.

  • BoreØ32 mm
  • Stroke40 mm
  • Port sizePT1/8
  • Acting typeDouble acting
  • Rod threadM6×1.0 (F) / M10×1.25 (B)
  • CushionFixed NBR bumper (both ends)
$32.99 Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDA32 stroke, mounting and version on one page All SDA32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the AirTAC SDA32X40N Compact Cylinder | 32mm Bore

The AirTAC SDA32X40N is a double-acting single-rod compact cylinder engineered to deliver 402.1 N of push force and 345.6 N of pull force at 0.5 MPa. Its riveted assembly merges the barrel, rear cover, piston and rod into an ultra-short unit, drastically reducing axial mounting depth where a conventional round-body actuator would be too long.

This 32 mm bore model features a hard-anodized inner wall and a fixed NBR bumper at each end to absorb end-stop impact. Because this specific SKU lacks the -S magnet option, it cannot host AirTAC reed or electronic switches. The piston rod measures 12 mm with a default female M6x1.0 end thread, operating at speeds of 30-500 mm/s.

AirTAC SDA32X40N Compact Cylinder | 32mm Bore Technical Specifications

ModelAirTAC SDA32X40N Compact Cylinder | 32mm Bore
SeriesSDA compact (thin) cylinder
Bore sizeØ32 mm
Stroke40 mm
Acting typeDouble acting
Port sizePT1/8
Rod end threadM6×1.0 female / M10×1.25 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)
Max standard strokeUp to 120 mm

Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa402 N346 N
0.7 MPa563 N—
Max (@1.0 MPa)82 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: AirTAC SDA32X40N Compact Cylinder | 32mm Bore

SDACompact (thin) double-acting cylinder series.
32Bore size in mm.
×40Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).

Where the AirTAC SDA32X40N Compact Cylinder | 32mm Bore Is Used

precision_manufacturing

PCB Depaneling Router

Provides the 402.1 N extension force needed to clamp populated circuit boards securely within an automated depaneling fixture.

conveyor_belt

Package Lane Diverter

Pushes small to medium parcels across sorting belts at up to 500 mm/s, utilizing the 40 mm stroke to clear adjacent conveyor lanes.

factory

Small Part Ejection Press

Ejects stamped aluminum brackets from a die set, relying on the fixed NBR bumper to absorb the end-stop shock without external cushions.

Is the AirTAC SDA32X40N Compact Cylinder | 32mm Bore the Right Cylinder?

When sizing this actuator, evaluate your neighbours: stepping down to the SDA25 yields 245.4 N push at 0.5 MPa, while stepping up to the SDA40 provides 628.3 N. Confirm your ordering essentials: 32 mm bore, 40 mm stroke, PT1/8 port, female rod thread, and no sensor magnet.

Note that a standard compact cylinder drifts when air pressure is lost or the valve is centred. The fixed NBR bumper only decelerates the piston near the stroke extremes; it does not function as a locking brake. If your application must hold a load without live pressure, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

AirTAC SDA32X40N Compact Cylinder | 32mm Bore FAQ

At 0.5 MPa this 32 mm bore cylinder provides 402.1 N push and 345.6 N pull. At 0.7 MPa it yields 563 N push and 483.8 N pull. The theoretical maximum push force is 82 kgf at 1.0 MPa, with an operating pressure range of 0.15-1.0 MPa.

No, this specific SKU does not include the -S piston magnet, meaning it cannot support AirTAC reed or electronic switches. You would need to specify the -S option code when ordering to enable switch sensing in the body grooves.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDA Compact Cylinders

Request a Quote for AirTAC SDA32X40N Compact Cylinder | 32mm Bore

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDA32X40N and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.