
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X25-30B is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X25-30B is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. An external M5x0.8 adjuster screw lets you dial the forward end-position anywhere from 0 to 25 mm without changing parts.
This variant features a male M5x0.8 piston rod thread and lacks a piston magnet. Its short riveted body drastically cuts axial mounting depth where space is tight. End-of-stroke deceleration is handled by a fixed NBR bumper, which slows the impact but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X25-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 25 mm |
| Adjustable range | 0 – 25 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Perfect for small machining fixtures where the male M5 rod must contact delicate parts. Turn the M5x0.8 screw to set the exact 0-25 mm extend stop without swapping shims.
Ideal for trial-and-error probe placement in testing rigs. The adjuster sets the mechanical stop precisely, while the fixed NBR bumper safely absorbs the end impact.
If your application requires more push, stepping up to the SDAJ16 provides 100.5 N at 0.5 MPa. Conversely, this is the smallest standard option available. Confirm your setup needs a 0-25 mm extend window, an M5x0.8 port, and the male M5 rod end.
This unit is ideal for operators needing frequent trial positioning or rapid machine changeovers. Remember that the fixed bumper only decelerates the stroke end; it does not function as a lock. If your load must be held vertically during air loss or valve centering, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 12 kgf at 1.0 MPa.
No, this specific SKU lacks the -S option and therefore has no internal piston magnet, meaning it cannot accept reed or electronic switches. You would need the -S variant for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.