
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-10B is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X30-10B is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the forward end-position anywhere between 20 and 30 mm directly on the machine, avoiding part swaps during changeover.
This variant uses a male M5x0.8 piston rod thread and a short riveted body to save axial mounting depth in tight assemblies. End shock is managed solely by a fixed NBR bumper, which decelerates the piston near the ends but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 30 mm |
| Adjustable range | 20 – 30 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M5 rod protrusion on the fly during product changeovers to strike lightweight plastic modules at the exact ejection point.
Set precise trial positions for test probes in compact lab rigs, exploiting the short riveted body to fit dense prototype breadboards.
When sizing this 12 mm bore, consider the neighbouring SDAJ16, which raises the 0.5 MPa push to 100.5 N. Choose this unit when your fixture requires precise on-site stroke tuning within the 20 to 30 mm window.
Confirm the bore, 30 mm maximum stroke, 10 mm adjustment window, and M5x0.8 air port. This SKU includes the -B male M5x0.8 rod thread but no -S magnet. Remember that a standard cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end and does not lock the load. For vertical holding without live pressure, specify an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 12 kgf at 1.0 MPa.
Turning the R (M5x0.8) screw mechanically shortens the extend stop from the 30 mm maximum down to 20 mm without changing the force. It is not a mid-stroke lock; the cylinder drifts on air loss, so use an external rod lock for load holding. This SKU has no magnet, but adding an -S variant enables reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.