
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-10S is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X30-10S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M5x0.8 adjuster screw lets you dial the extend position down from the maximum 30 mm to a 20 mm minimum directly at the machine, eliminating the need for shims or part swaps during changeovers.
Built with a short riveted body, this unit saves valuable axial mounting depth where round-body or larger profile cylinders cannot fit. It relies on a fixed NBR bumper at each end to decelerate the stroke end, meaning it is not an adjustable air cushion. The included -S piston magnet supports AirTAC reed or electronic solid-state switches mounted in the body grooves for precise position sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 30 mm |
| Adjustable range | 20 – 30 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the 20-30 mm extend stop on delicate machining fixtures to perfectly seat fragile parts without crushing them.
Set exact fluid deposit heights by turning the M5x0.8 adjuster screw, ensuring the nozzle retracts cleanly without dripping.
When sizing this 12 mm bore actuator, evaluate your force requirements both ways. Choose this specific model if your fixture requires on-site stroke tuning between 20 and 30 mm.
Confirm the bore, 30 mm maximum stroke, 10 mm adjust window, and M5x0.8 air port match your pneumatic layout. The -S magnet is present for sensing, and the rod-end thread is female M3x0.5. Note that a plain cylinder does not hold its load on air loss or when the valve is centered; the fixed bumper only decelerates near the end of travel and the R screw is a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 12 kgf at 1.0 MPa.
The R (M5x0.8) screw shortens the extend end position by up to 10 mm, giving a usable range of 20-30 mm without changing force. The built-in -S magnet works with AirTAC reed or electronic switches for position sensing, while a fixed NBR bumper handles end deceleration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.