verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-20B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-20B is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 10 to 30 mm on the machine — no shims, no part change.

  • BoreØ12 mm
  • Max stroke30 mm
  • Adjustable range10–30 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$28.14 $35.64Save 21% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ12 stroke, mounting and version on one page All SDAJ12 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-20B

The AirTAC SDAJ12X30-20B is a compact double-acting double-rod cylinder engineered with an on-site extend stop. An external M5x0.8 adjuster screw lets you dial the forward end-position anywhere between 10 and 30 mm, eliminating the need for shims or part swaps during machine commissioning.

This 12 mm bore variant features a male M5x0.8 piston rod thread and a short riveted body that conserves axial mounting depth in cramped enclosures. End-of-travel shock is handled by a fixed NBR bumper rather than an adjustable air cushion. Note this SKU lacks a piston magnet, so position sensing is not supported without the -S option.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-20B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ12 mm
Max stroke30 mm
Adjustable range10 – 30 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø12mm)

PressurePush forcePull force
0.5 MPa42 N42 N
0.7 MPa59 N—
Max (@1.0 MPa)9 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-20B

SDAJCompact double-acting cylinder with adjustable stroke.
12Bore size in mm.
×30Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-20B Is Used

science

Lab Test Positioning

Iterate on sensor or probe extension lengths rapidly during lab testing, using the M5x0.8 adjuster screw to find the optimal contact point.

view_module

Compact Assembly Ejector

Fit into tight assembly fixtures where axial space is restricted, adjusting the ejection stroke on the fly to accommodate different product heights.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-20B the Right Cylinder?

Since 12 mm is the smallest available SDAJ frame, there is no smaller neighbour to step down to.

Engineers who need frequent changeovers or trial positioning will benefit from the 10-30 mm adjustability window. Remember that a plain cylinder drifts when air is lost or the valve is centred; the fixed bumper only decelerates the stroke end and does not act as a lock. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your bore, 30 mm max stroke, 20 mm window, M5x0.8 port, male rod thread, and lack of magnet before ordering.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 10–30 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-20B FAQ

Turning the R (M5x0.8) screw mechanically shortens the extend stroke by up to 20 mm, allowing the rod to stop anywhere between 10 and 30 mm. It sets the stop position and does not alter force or lock the load mid-stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-20B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ12X30-20B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.