
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-20S is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 10 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X30-20S is a compact double-acting double-rod cylinder engineered for tight axial spaces. A front R (M5x0.8) adjuster screw lets you dial the extend stop from 10 to 30 mm directly on the machine, removing the need for shims or part swaps during changeovers. The short riveted body saves mounting depth where larger profile cylinders cannot fit.
This specific unit includes a built-in piston magnet (-S) for AirTAC reed or electronic switches. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 30 mm |
| Adjustable range | 10 – 30 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 30 mm to set exact clamping depth on delicate electronic components without machining new spacers.
The R screw provides a 20 mm adjustment window for trial positioning, but note that a plain cylinder does not hold a load on air loss or valve centering; use an external rod lock or pilot-operated check valve for secure holding.
Verify your setup requires an M5x0.8 air port, a 6 mm rod, and the female M3x0.5 rod-end thread. The -S magnet enables position sensing, while the fixed NBR bumper handles end deceleration at speeds between 30 and 500 mm/s.
Quick checklist
The theoretical maximum push is 12 kgf at 1.0 MPa.
The M5x0.8 R screw shortens the extend stop by up to 20 mm, giving a usable extend range of 10 to 30 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.