
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-30 is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X30-30 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M5x0.8 adjuster screw lets you dial the extend position down from 30 mm to 0 mm directly on the machine, eliminating the need for shims or part swaps. The retract stroke remains full length.
The short riveted body saves valuable axial mounting depth where larger profile or round-body units will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 30 mm |
| Adjustable range | 0 – 30 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 30 mm to set exact clamping depth on delicate electronic components without machining custom spacers.
Conversely, if your space is extremely tight and the load is very light, there is no smaller SDAJ bore, making this the most compact option available.
On-machine stroke tuning benefits setup-heavy lines and trial positioning. Confirm your requirements for bore, stroke, window, and the M5x0.8 port. This SKU has a female rod-end thread and no magnet. Remember that a plain cylinder does not hold its load on air loss or valve centering; the fixed bumper only decelerates near the end and the screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
At 0.7 MPa, push is 79.2 N and pull is 59.4 N. The theoretical maximum push is 12 kgf at 1.0 MPa.
Turning the R (M5x0.8) screw shortens the extend stop by up to 30 mm, giving a usable extend range of 0-30 mm. It sets the stop position and does not change force. It is not a mid-stroke lock; the cylinder cannot hold a load on air loss without an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.