
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-30B is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X30-30B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M5x0.8 adjuster screw lets you dial the forward stroke from 0 to 30 mm directly on the machine without changing parts.
This variant features a male M5x0.8 piston rod thread and a short riveted body that saves axial mounting depth where round-body units will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, not an adjustable air cushion. Note this SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 30 mm |
| Adjustable range | 0 – 30 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 30 mm to land a test probe precisely on varying board heights without machining new spacers.
Set exact forward travel for delicate sample holding, ensuring the rod stops cleanly via the fixed NBR bumper before over-travel occurs.
When sizing this 12 mm bore actuator, consider the neighbouring SDAJ16, which raises the 0.5 MPa push to 100.5 N if you need greater force. Choose the SDAJ12X30-30B when your fixture requires on-site extend tuning between 0 and 30 mm via the M5x0.8 screw.
Confirm the bore, 30 mm maximum stroke, 30 mm window, M5x0.8 port, and male M5x0.8 rod thread suit your assembly. A plain cylinder does not hold its load on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The M5x0.8 R screw mechanically shortens the extend stop from 0 to 30 mm; it does not alter force or lock mid-stroke. Because this SKU lacks a -S magnet, it cannot accept reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.