
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-30S is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X30-30S is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the outward stroke from 0 to 30 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
The short riveted body drastically cuts axial mounting depth where round-body or profile variants will not fit. This 12 mm bore unit uses an M5x0.8 air port and a 6 mm rod, relying on a fixed NBR bumper at each end to decelerate the stroke end. Equipped with a built-in piston magnet (-S), it supports AirTAC reed or electronic switches for precise end-of-travel signaling.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X30-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 30 mm |
| Adjustable range | 0 – 30 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the stroke on the fly for varying box heights during format changeovers, ensuring the 6 mm rod hits the flap at the exact angle.
Set the precise extension depth for a liquid nozzle over multiple test trays, relying on the built-in magnet to confirm the retract position.
When sizing this unit, evaluate both directions: stepping down is not an option as 12 mm is the smallest available bore, while moving up to the 16 mm bore increases the 0.5 MPa push force to 100.5 N. This SDAJ12X30-30S is ideal for operators needing frequent on-site stroke tuning within its 0-30 mm window.
Keep in mind that a plain cylinder does not hold its load if air pressure drops or the valve is centered—the piston will drift and the fixed bumper only decelerates near the end of travel, acting as a mechanical stop rather than a lock. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your bore, stroke, window, M5x0.8 port, female rod-end thread, and required -S magnet before ordering.
Quick checklist
At 0.7 MPa, the push force is 79.2 N. The theoretical maximum push force is 12 kgf at 1.0 MPa.
Turning the R (M5x0.8) screw shortens the extend stop by up to 30 mm, giving a usable extend range of 0-30 mm without changing parts. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.