
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-10 is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 25 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X35-10 is a compact double-acting double-rod cylinder featuring an external extend stop. A front M5x0.8 adjuster screw lets you dial the extend position down from 35 mm to 25 mm directly on the machine, eliminating the need for shims or part swaps during setup. The retract stroke remains full length.
This 12 mm bore unit saves valuable axial mounting depth where larger profile bodies will not fit. It uses a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. Operating speed spans 30-500 mm/s. Note that this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 35 mm |
| Adjustable range | 25 – 35 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Use the M5x0.8 adjuster to find the exact 2.9 kg vertical touch point during trial assembly, then lock the screw for the run.
Set a precise 34 N safe working clamping force against delicate components by adjusting the extend end position on-site.
When sizing this actuator, consider the physical limits of the 12 mm bore alongside the 10 mm adjustment window. Conversely, this SDAJ12 sits at the smallest available bore in the series. Confirm your required extend window falls within 25-35 mm, the porting matches your M5x0.8 supply, and you specify the female M3x0.5 rod thread.
Remember that a plain cylinder does not hold its load when air is lost or the valve is centred; the piston drifts. The fixed NBR bumper only decelerates near the stroke end and is never a lock. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The operating speed ranges from 30 to 500 mm/s.
Turning the external M5x0.8 screw shortens the extend stroke by up to 10 mm, giving a usable range of 25-35 mm. The screw acts only as a mechanical stop and does not change the force. It will not hold a load if air pressure drops; use an external rod lock for holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.