
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-10B is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 25 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X35-10B is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop between 25 and 35 mm. The male M5x0.8 piston rod threads directly into your tooling.
Built with a short riveted body, this unit minimizes axial mounting depth where larger profile or round-body actuators will not fit. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. Keep in mind this SKU lacks a piston magnet, so it cannot support reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 35 mm |
| Adjustable range | 25 – 35 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the downward travel of a male M5x0.8 rod on a pick-and-place head to seat connectors perfectly, relying on the short riveted body to fit tight assembly z-axes.
Adjust the extend endpoint on the fly for different vial heights, using the 10 mm window to lower the tooling safely before triggering the fixed NBR bumper at the stroke end.
When sizing this 12 mm bore actuator, consider the adjacent SDAJ16, which raises the 0.5 MPa push output to 100.5 N for heavier tooling. Confirm your requirements for the 35 mm maximum stroke, the 10 mm adjustment window, the M5x0.8 air port, and the male M5x0.8 rod thread.
This actuator excels in setups requiring on-site stroke tuning during commissioning. Remember that a plain compact cylinder does not hold position upon air loss or valve centering—the piston drifts, as the fixed bumper only decelerates near the end of travel. For suspended or vertical loads that must remain fixed without live pressure, specify an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa, push is 79.2 N. The theoretical maximum push is 12 kgf at 1.0 MPa.
The external M5x0.8 adjuster screw mechanically shortens the extend stroke by up to 10 mm, giving a usable 25-35 mm range. It acts only as a mechanical stop and does not alter force. The cylinder cannot hold a load on air loss; use an external rod lock or pilot-operated check valve for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.