
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-10S is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 25 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X35-10S is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the outward stroke from 25 to 35 mm directly on the machine, saving axial mounting depth where larger bodies fail to fit.
This 12 mm bore unit uses a fixed NBR bumper to decelerate the stroke end rather than an adjustable air cushion. The included piston magnet supports AirTAC reed or electronic switches for position sensing. The mechanical stop sets the endpoint without altering the pneumatic force.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 35 mm |
| Adjustable range | 25 – 35 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the 25-35 mm extend stop on delicate machining fixtures to prevent crushing small components.
Adjust the outward reach on the fly for circuit board routing lines without swapping out the entire actuator.
Downward from 12 mm there is no smaller SDAJ option, placing this at the series edge. This model suits operators needing frequent on-machine stroke tuning during changeovers. Remember a plain cylinder drifts on air loss; add an external rod lock or pilot-operated check valve to hold a load safely. Configuration: 12 mm bore, 35 mm stroke, 10 mm window, M5x0.8 port, female M3x0.5 rod thread, with an S magnet.
Quick checklist
The theoretical maximum push is 12 kgf at 1.0 MPa.
The R M5x0.8 screw shortens the extend stop up to 10 mm, giving a 25-35 mm usable range. The S suffix means a built-in magnet for AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.