
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-20SB is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 15 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X35-20SB is a compact double-acting double-rod cylinder featuring an on-site extend stop. A built-in M5x0.8 adjuster screw lets you dial the outward travel anywhere between 15 and 35 mm without changing parts.
This variant includes a male M5x0.8 piston rod thread and a built-in magnet for position sensing. The short riveted body saves valuable axial mounting depth in tight machinery. End-of-travel shock is handled by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion or a locking device.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 35 mm |
| Adjustable range | 15 – 35 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Use the male M5x0.8 rod end to mount a testing probe, adjusting the reach on the machine to hit different test points accurately within the compact riveted body footprint.
Fine-tune the ejection distance on changeover for varying product sizes, ensuring the 12 mm bore delivers the exact travel needed without requiring physical shims.
When sizing this actuator, consider the 12 mm bore alongside its neighbours. Choose this specific SDAJ12X35-20SB configuration when you need precise 15-35 mm extend tuning, a male rod end, and switch tracking.
Remember that a standard compact cylinder cannot hold a load if air pressure drops or the valve is centered; the piston will drift. The fixed bumper only decelerates the stroke near its end and the R screw acts as a mechanical stop, neither function as a brake. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your requirements for the 12 mm bore, 35 mm max stroke, 20 mm window, M5x0.8 port, male rod thread, and magnet before ordering.
Quick checklist
At 0.7 MPa, the push increases to 79.2 N. The theoretical maximum push force is 12 kgf at 1.0 MPa.
The M5x0.8 adjuster screw shortens the extend stroke by up to 20 mm, allowing you to set the outward stop anywhere between 15 and 35 mm. This unit includes a built-in magnet (-S) compatible with AirTAC reed or electronic solid-state switches for position confirmation.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.