
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-10S is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 30 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X40-10S is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the outward stroke from 30 to 40 mm directly on the machine, avoiding part swaps during changeovers.
The short riveted body minimizes axial footprint where space is tight, while a fixed NBR bumper decelerates the piston at the ends. This unit includes a built-in magnet for AirTAC reed or electronic switches. The 6 mm rod and M5x0.8 port keep the envelope small for light-duty positioning.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 40 mm |
| Adjustable range | 30 – 40 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 30-40 mm extend stop to touch a part precisely without overtravel, protecting delicate sensors during automated inspection.
Fit the short riveted body into tight enclosures and use the magnet for position confirmation during sample handling.
Since 12 mm is the smallest standard SDAJ size, there is no smaller adjacent bore in this series.
Choose this model when trial positioning or frequent setup changes require on-site stroke tuning. Confirm your requirements for the 40 mm maximum stroke, 10 mm adjust window, M5x0.8 port, female M3x0.5 rod thread, and the -S magnet. Remember that a plain cylinder does not hold a load if air pressure drops; add an external rod lock or pilot-operated check valve for secure holding.
Quick checklist
The theoretical maximum push is 12 kgf at 1.0 MPa.
The M5x0.8 R screw shortens the extend stop up to 10 mm, giving a usable range of 30-40 mm. The included -S magnet works with AirTAC reed or electronic switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.