verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20B is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 20 to 40 mm on the machine — no shims, no part change.

  • BoreØ12 mm
  • Max stroke40 mm
  • Adjustable range20–40 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$30.00 $37.50Save 20% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ12 stroke, mounting and version on one page All SDAJ12 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20B

The AirTAC SDAJ12X40-20B is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that lets you dial the extend stop down from 40 mm to 20 mm directly on the machine. This SKU uses a male M5x0.8 piston rod thread instead of the default female M3x0.5.

Its short riveted body saves valuable axial mounting depth where round-body or larger profile units will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific configuration ships without a piston magnet, so it cannot host reed or electronic switches.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ12 mm
Max stroke40 mm
Adjustable range20 – 40 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø12mm)

PressurePush forcePull force
0.5 MPa42 N42 N
0.7 MPa59 N—
Max (@1.0 MPa)9 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20B

SDAJCompact double-acting cylinder with adjustable stroke.
12Bore size in mm.
×40Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20B Is Used

precision_manufacturing

Trial Positioning Jigs

Dial the extend stop between 20 and 40 mm to find the exact contact point for delicate probe arms or micro-clamps during initial fixture setup.

science

Lab Automation Stops

Use the male M5x0.8 rod end to mount sample trays and set the extend limit precisely, ensuring repeatable positioning in tight analytical equipment.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20B the Right Cylinder?

When sizing this 12 mm bore actuator, evaluate the neighbouring bores to match your payload.

Choose this male-rod (-B) version if your tooling mates with an M5x0.8 external thread. The 20 mm adjustment window is ideal for trial positioning or frequent changeovers. Remember that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near the end of travel and is not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 20–40 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20B FAQ

Operating pressure ranges from 0.15 to 1.0 MPa.

Turning the R (M5x0.8) screw mechanically shortens the extend stroke by up to 20 mm, giving a usable range of 20 to 40 mm without changing parts. This specific SKU lacks the -S magnet, so it cannot accept reed or electronic switches; you would need the -S variant for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-20B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ12X40-20B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.