
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-30 is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 10 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X40-30 is a compact double-acting double-rod cylinder featuring an external extend stop. A front M5x0.8 adjuster screw lets you dial the outward stroke down by up to 30 mm directly at the machine, yielding a usable 10 to 40 mm extension range without swapping shims or parts. Retract remains full length.
The short riveted body minimizes axial footprint, while a fixed NBR bumper decelerates the piston at the ends. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 40 mm |
| Adjustable range | 10 – 40 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Turn the M5x0.8 screw to set the exact 10-40 mm extend distance for delicate clamping without remachining stops.
Leverage the short riveted body to fit multiple actuators in tight arrays where axial depth is severely restricted.
Choose this model for trial positioning or frequent changeover lines where on-site tuning prevents manufacturing rework. Note that a plain SDAJ will drift and cannot hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates near the end, so add an external rod lock or pilot-operated check valve for true load holding. Confirm your specs: 12 mm bore, 40 mm max stroke, 30 mm window, M5x0.8 port, no magnet, and female M3x0.5 rod thread.
Quick checklist
The front R thread M5x0.8 screw mechanically shortens the extend stroke by up to 30 mm, allowing an on-machine range of 10 to 40 mm. It sets the stop position only and does not alter the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.