
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X60-20B is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 40 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X60-20B is a compact double-acting double-rod cylinder featuring an external extend stop. A front M5x0.8 adjuster screw lets you dial the forward stroke down by up to 20 mm directly at the machine, yielding a usable forward range of 40 to 60 mm without swapping shims or parts. Retract remains full length.
This 12 mm bore unit uses a short riveted body to save axial mounting depth where round-body or profile variants will not fit. The rod end is male M5x0.8 thread (option B) on a 6 mm piston rod. End shock is absorbed by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion. Note this SKU lacks a piston magnet, so it cannot accept reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X60-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 60 mm |
| Adjustable range | 40 – 60 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 40 and 60 mm to land a test probe precisely on varying PCB heights during changeover.
Adjust the mechanical stop on-site to fine-tune fluid deposit depth, relying on the fixed NBR bumper to absorb the end-of-travel shock.
When sizing this 12 mm bore actuator, consider the neighbouring bores to match your load. Choose this specific model when your fixture requires on-machine stroke tuning across a 40-60 mm window and a male M5x0.8 rod thread. Confirm the 60 mm maximum stroke, 20 mm adjust window, M5x0.8 air port, and absence of a magnet (no -S) suit your pneumatic layout.
Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the stroke end. For a securely held load without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The adjuster does not alter these force figures.
Turning the R (M5x0.8) screw shortens the extend end position by up to 20 mm, giving a usable forward range of 40 to 60 mm. This specific SKU has no piston magnet, so it cannot accept reed or electronic switches; you would need the -S variant for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.