verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X60-30SB

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X60-30SB is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.

  • BoreØ12 mm
  • Max stroke60 mm
  • Adjustable range30–60 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$44.16 $51.66Save 14% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ12 stroke, mounting and version on one page All SDAJ12 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X60-30SB

The AirTAC SDAJ12X60-30SB is a compact double-acting double-rod cylinder featuring an on-machine extend stop. An external M5x0.8 adjuster screw lets you dial the forward stroke anywhere between 30 and 60 mm without swapping shims or parts.

This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M5x0.8 piston rod end. The short riveted body minimizes axial mounting depth in tight spaces. End-of-travel deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion. Note that the 60 mm stroke exceeds the standard 50 mm maximum for a 12 mm bore, making this a non-standard stroke configuration.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X60-30SB Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X60-30SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ12 mm
Max stroke60 mm
Adjustable range30 – 60 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø12mm)

PressurePush forcePull force
0.5 MPa42 N42 N
0.7 MPa59 N—
Max (@1.0 MPa)9 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X60-30SB

SDAJCompact double-acting cylinder with adjustable stroke.
12Bore size in mm.
×60Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X60-30SB Is Used

precision_manufacturing

Small Parts Ejector

Dial the 30 to 60 mm extend stop to tune the ejection distance of delicate plastic components without reprogramming the machine cycle.

view_module

PCB Probe Fixture

Use the male M5x0.8 rod to mount a testing probe, adjusting the extend stop on the fly to accommodate different printed circuit board thicknesses.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X60-30SB the Right Cylinder?

Dropping down is not an option as 12 mm is the smallest available bore.

Choose this specific SDAJ12X60-30SB model when your application requires exact forward positioning tuned on-site. Confirm your requirements for the 12 mm bore, 60 mm maximum stroke, 30 mm adjustment window, M5x0.8 air port, male M5x0.8 rod thread, and the integrated magnet. Remember that a plain cylinder does not hold a load if air pressure drops or the valve is centered; install an external rod lock or pilot-operated check valve for secure load holding.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 30–60 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X60-30SB FAQ

The M5x0.8 R screw shortens the extend stroke by up to 30 mm, allowing a usable range of 30 to 60 mm. The included -S magnet works with AirTAC reed or electronic switches mounted in the body grooves for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X60-30SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ12X60-30SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.