
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X60-50B is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 10 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X60-50B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M5x0.8) screw, you can dial the forward end-position anywhere between 10 and 60 mm directly on the machine, avoiding shims or part swaps.
This variant uses a male-threaded M5x0.8 piston rod and lacks a piston magnet, meaning it cannot host reed or electronic switches. The short riveted body minimizes axial mounting depth where larger profile cylinders will not fit. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X60-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 60 mm |
| Adjustable range | 10 – 60 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 60 mm during prototype tooling setup to find the exact contact point without machining new spacers.
Quickly re-adjust the 56.5 N forward thrust endpoint on packaging lines running multiple product sizes.
Employ the compact riveted body and male M5x0.8 rod to fit tight vertical lift stations lifting under 2.9 kg.
Choose this specific model when your fixture requires on-site stroke tuning across a 50 mm window.
Confirm the bore (12 mm), maximum stroke (60 mm), adjustment window (50 mm), and M5x0.8 air port. This SKU includes the male M5x0.8 rod thread (-B) and no magnet. Note that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end and is not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
Turning the external R (M5x0.8) screw mechanically shortens the extend stroke down to 10 mm from the 60 mm maximum. Retract remains full stroke, and the screw acts as a stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.