
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X60-75SB is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X60-75SB is a compact double-acting cylinder featuring an on-site extend stop. A front M5x0.8 adjuster screw lets you dial the outward stroke from 0 to 60 mm without changing parts.
This variant includes a built-in magnet (-S) for AirTAC reed or electronic switches and a male M5x0.8 piston rod (-B) instead of the default female thread. The short riveted body saves axial mounting depth where round-body units will not fit. End shock is handled by a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X60-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 60 mm |
| Adjustable range | 0 – 60 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 60 mm to find the exact contact point for delicate probes, locking the M5x0.8 screw once the ideal geometry is reached.
Fit the male M5x0.8 rod to a custom gripper and tune the stroke window for varying vial heights, saving axial depth in tight enclosures.
Choose this 60 mm maximum extend configuration when you need trial positioning or frequent changeovers. It carries a 75 mm adjustment window, an M5x0.8 port, the -S magnet, and the -B male rod thread.
Remember that a plain actuator does not hold a load when air is lost or the valve centers. The piston drifts, and the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 12 kgf at 1.0 MPa.
The front M5x0.8 screw shortens the extend stop by up to 75 mm, giving a usable 0 to 60 mm outward range. The included -S magnet works with AirTAC reed or electronic solid-state switches to confirm end positions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.