verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X70-30B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X70-30B is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 40 to 70 mm on the machine — no shims, no part change.

  • BoreØ12 mm
  • Max stroke70 mm
  • Adjustable range40–70 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$41.63 $49.13Save 15% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ12 stroke, mounting and version on one page All SDAJ12 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X70-30B

The SDAJ12X70-30B is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop from 40 to 70 mm on-site. This specific configuration includes a male-threaded M5x0.8 piston rod for direct mounting.

Its short riveted body saves valuable axial mounting depth where larger profile or round-body units will not fit. The 70 mm stroke is a non-standard made-to-order length for this 12 mm bore, extending beyond the 60 mm standard maximum. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X70-30B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X70-30B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ12 mm
Max stroke70 mm
Adjustable range40 – 70 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø12mm)

PressurePush forcePull force
0.5 MPa42 N42 N
0.7 MPa59 N—
Max (@1.0 MPa)9 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X70-30B

SDAJCompact double-acting cylinder with adjustable stroke.
12Bore size in mm.
×70Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X70-30B Is Used

precision_manufacturing

Probe Positioning

Dial in the 40-70 mm extend stop on test fixtures to trigger probes accurately without machining new spacers.

sync_alt

Changeover Adjustments

Quickly tune the extend endpoint during product changeovers on compact packaging lines to vary the push depth.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X70-30B the Right Cylinder?

When sizing this unit, consider the 12 mm bore against its neighbors. Choose this male-rod (-B) model if your tooling requires an external M5x0.8 thread instead of the default female M3x0.5.

This cylinder is built for setups requiring on-site stroke tuning without part changes. Note that a plain SDAJ does not hold position or load when air is lost or the valve is centered; the piston drifts, and the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your bore, 70 mm stroke, 30 mm window, M5x0.8 port, and lack of a magnet before ordering.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 40–70 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X70-30B FAQ

The theoretical maximum push is 12 kgf at 1.0 MPa.

The M5x0.8 R screw mechanically shortens the extend stop from 70 mm down to 40 mm without altering the force. This specific SKU lacks the -S magnet, so it cannot accept reed or electronic switches; the -S variant is required for sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X70-30B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ12X70-30B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.